Bently Nevada 330104-00-06-10-02-00 3300 XL 8 mm Proximity Probe

Description

Fully threaded M10 x 1 metric probe body (Option 00) with 60 mm case (Option 06) and 1.0 m lead (Option 10) with standard flexible armor — 330104-00-06-10-02-00. This configuration is equipped with a standard cable and a miniature coaxial ClickLoc connector (Option 02) without a connector protector. It is configured for applications where hazardous area agency approvals are not required (Option 00).

This specific configuration differs from the standard unarmored sibling model (330103) by incorporating a protective flexible AISI 302/304 stainless steel armor sleeve with an FEP outer jacket, which shields the coaxial cable from physical abrasion and mechanical damage. The M10 x 1 metric threaded case provides direct compatibility with metric bracket mountings. The 1.0-meter total system length is calibrated for use with standard extension cables and 3300 XL Proximitor sensors in non-contact eddy-current measurement loops.

Features

• M10 x 1 metric thread type with fully threaded case (0 mm unthreaded length) for flexible mounting depth.
• 60 mm overall case length designed for standard metric machine casings and bracket installations.
• 1.0 meter (3.3 feet) total cable length matching standard 5-meter or 9-meter transducer system loops.
• Protective stainless steel armor sleeve with FEP outer jacket to protect against harsh industrial environments and physical wear.
• Miniature coaxial ClickLoc connector (Option 02) without connector protector.

Applications

Typically used for non-contact machinery protection and condition monitoring. Specific industrial applications include:

• Radial shaft vibration measurement on rotating machinery.
• Axial thrust position and thermal expansion tracking on steam turbines, gas turbines, and compressors.
• Shaft eccentricity and speed measurements.
• Industrial installations requiring mechanical armor protection against hot oils, metal chips, and physical debris.

Ordering Information

Technical Specifications

Installation Guidelines

Proper installation is required. Observe the following mechanical and environmental limits:

• Maximum Case Torque: Do not exceed 22.6 N-m (200 in-lbf) when tightening the probe case. Recommended torque is 7.5 N-m (66 in-lbf).
• Minimum Cable Bend Radius: Maintain a minimum bend radius of 25.4 mm (1.0 inch) for the armored probe cable.
• Thread Engagement: The maximum rated length of thread engagement for M10 x 1 threads is 15 mm. Exceeding this limit can cause binding during installation.
• Grounding: The probe cable shield must be grounded through the Proximitor sensor terminal block to prevent electrical interference.