Bently Nevada 330104-00-06-90-02-00 3300 XL 8 mm Proximity Probe

Description

The 330104-00-06-90-02-00 is a 3300 XL 8 mm proximity probe featuring an M10 x 1 thread, integrated armor, and a 9.0-meter total system length. This configuration includes a 0.0-inch unthreaded length (Option 00), 0.6-inch case length (Option 06), 9.0-meter total length (Option 90), and a standard connector (Option 02), with no hazardous area approvals (Option 00). As a component of the Bently Nevada 3300 XL 8 mm proximity transducer system, this probe is engineered for non-contact eddy-current displacement measurement, serving as a critical part of machinery protection and condition monitoring chains. It is designed for use in harsh industrial environments, offering high-accuracy vibration and axial position measurement for rotating machinery, such as gas and steam turbines, compressors, and pumps.

Features

• M10 x 1 thread with integrated armor for enhanced mechanical protection
• 0.0-inch unthreaded length and 0.6-inch total case length
• 9.0-meter total system length (probe plus extension cable)
• Standard ClickLoc connector interface
• Compatible with Bently Nevada 3300 XL Proximitor sensors and extension cables
• Eddy-current principle for precise gap and vibration measurement

Applications

• Shaft vibration monitoring on large rotating machinery
• Axial position (thrust) measurement
• Critical machinery protection in power generation, petrochemical, and oil and gas industries
• High-reliability displacement sensing for turbine and compressor rotor trains

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	330104-00-06-90-02-00	3300 XL 8 mm Proximity Probe, M10 x 1
A - Unthreaded Length	00	0.0 inch
B - Case Length	06	0.6 inch
C - Total Length	90	9.0 meters
D - Connector/Cable	02	Miniature ClickLoc coaxial connector, standard cable
E - Agency Approval	00	Not required

Technical Specifications

Manufacturer	Bently Nevada
Part Number	330104-00-06-90-02-00
Probe Diameter	8 mm
Thread Size	M10 x 1
Cable Type	Standard
Armor	Yes (Integrated)
Total Length	9.0 meters
Connector	Miniature ClickLoc
Agency Approvals	None (Option 00)

Installation Guidelines

• Ensure the probe gap is set according to the Bently Nevada 3300 XL system manual to maintain the linear operating range.
• The M10 x 1 threaded body should be secured with appropriate lock nuts; do not over-torque the probe body.
• Use the provided connector protectors if required to prevent contamination in severe environments.
• Ensure the extension cable and Proximitor sensor connections are tightened to the proper torque to maintain electrical integrity.
• Check that the total system length (probe plus extension cable) matches the requirements of the Proximitor sensor calibration.