Manufacturer: Bently Nevada
Product No.: 330104-00-11-10-01-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
The 330104-00-11-10-01-00 is an 8 mm proximity probe from the Bently Nevada 3300 XL transducer system, featuring an M10 x 1 thread with integrated armor for mechanical protection. This configuration includes a 0 mm unthreaded length, a 110 mm case length, and a 1.0 meter total system length. It is terminated with a miniature ClickLoc coaxial connector equipped with a connector protector and uses a standard cable. This probe is designed for non-contact eddy-current displacement measurements when paired with a compatible 3300 XL Proximitor sensor and extension cable.
The 3300 XL 8 mm transducer system is primarily used to monitor shaft vibration and axial position on critical rotating machinery such as turbines, compressors, and large motors. The 330104 series provides robust mechanical durability due to its stainless steel armored cable construction, protecting the lead against abrasion and debris in harsh industrial environments. This specific unit, with Option 00 for agency approval, is intended for non-hazardous locations or applications where external certifications are not required.
| Option | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330104-00-11-10-01-00 | 3300 XL 8 mm Proximity Probe, M10 x 1, armored |
| A - Unthreaded Length | 00 | 0 mm unthreaded length |
| B - Case Length | 11 | 110 mm case length |
| C - Total Length | 10 | 1.0 meter total length |
| D - Connector/Cable | 01 | Miniature ClickLoc connector with connector protector, standard cable |
| E - Agency Approval | 00 | Not required |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330104-00-11-10-01-00 |
| Probe Diameter | 8.0 mm |
| Thread Size | M10 x 1 |
| Case Material | AISI 303 or 304 stainless steel |
| Total Length | 1.0 meter |
| Cable Type | Standard, armored |
| Connector | Miniature ClickLoc coaxial with connector protector |
| Operating Temperature | -52 degC to +177 degC |
Ensure the probe is gapped according to the specific 3300 XL Proximitor sensor calibration requirements. When installing the M10 x 1 thread, do not exceed the maximum recommended thread engagement length of 15 mm to prevent mechanical binding. Ensure the ClickLoc connector is secured finger-tight; if connecting to a non-XL stainless steel connector, use a 1/8 turn with pliers to ensure electrical integrity. Proper cable routing should include stress relief to prevent vibration fatigue on the connector interface.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Check 1771-IG TTL HIGH/LOW logic thresholds, field supply ripple and 1771-WC wiring before replacing an input module.
A field checklist for distinguishing Danfoss 060G2105, 060G1323 and 060G2109 by pressure range, fitting, loop signal and controller scaling.
A field checklist for separating 24 VDC input, carrier bus, output derating and alarm-contact faults before replacing an Emerson SE5009.
A controlled commissioning method for using the 140XSM00200 simulator to verify Modicon Quantum input mapping and interlocks before reconnecting field wiring.
A commissioning checklist for the ProSoft PLX32-EIP-MBTCP covering subnet separation, register contracts, EtherNet/IP timing, failure tests and replacement records.
A field checklist for IC693MDL916 relay commands, terminal blocks, load current, switching rate and contact-side measurements.
