Bently Nevada 330104-01-05-10-02-00 3300 XL 8 mm Proximity Probe

Description

The 330104-01-05-10-02-00 is a high-precision, armored 3300 XL 8 mm proximity probe designed for non-contact eddy-current displacement measurement in critical rotating machinery. This specific configuration features an M10 x 1 thread (Option 04), an unthreaded length of 0.1 in (Option 01), a total case length of 0.5 in (Option 05), a 1.0 m total system length (Option 10), and a miniature coaxial ClickLoc connector with standard cable (Option 02). It is intended for integration into 3300 XL monitoring chains, utilizing 3300 XL Proximitor sensors and extension cables for reliable shaft vibration and axial position monitoring.

This transducer system is engineered for stability in demanding industrial environments. The armored cable design provides increased mechanical protection against abrasion and physical damage, while the ClickLoc connector ensures a secure, reliable electrical connection. This unit supports applications requiring hazardous area certification (Option 00 indicates not required for this specific configuration), making it suitable for standard deployments where non-hazardous approval is sufficient.

Features

• Option 01: 3/8-24 UNF thread (Note: 330104 series specifies M10 x 1 thread; please verify application-specific thread requirements).
• Option 05: 0.5 in case length for compact mounting.
• Option 10: 1.0 m total system length (probe plus extension cable).
• Option 02: Miniature coaxial ClickLoc connector, standard cable.
• Option 00: No agency approvals required for this configuration.
• Mechanical Design: Armored cable construction for enhanced durability in harsh environments.
• System Compatibility: Compatible with 3300 XL Proximitor sensors and extension cables in 8 mm monitoring chains.

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical rotating machinery protection
• General-purpose displacement and gap measurement
• Fluid film bearing analysis

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe is gapped correctly according to the 3300 XL Proximitor sensor output characteristics.
• Use appropriate mounting brackets (e.g., aluminum threaded or phenolic) to ensure structural integrity.
• Route cables away from high-power AC lines to minimize electromagnetic interference.
• Use connector protectors if the environment poses a risk of moisture or oil ingress to the connector junction.
• Secure the probe using the provided lock nuts to prevent vibration-induced loosening.