Description

Option 060 (6.0 meters cable length) and Option 02 (standard cable with integrated fluorosilicone connector protector) specify this 3300 XL Standard Extension Cable configuration — 330130-060-02-05. This cable provides the physical and electrical transmission link between a 3300 XL 8 mm proximity probe and a 3300 XL Proximitor sensor in non-contact displacement monitoring chains. In a complete transducer system, the total length of the probe and extension cable must match the required total system length of the Proximitor sensor (typically 5.0 or 9.0 meters). The pre-installed connector protector (Option 02) provides environmental sealing for the gold-plated ClickLoc connector joint, preventing fluid, oil, dust, and moisture ingress in aggressive machinery environments. Option 05 designates the certificate package for explosive or hazardous atmospheres, supporting installation requirements across globally certified process environments.

Features

• Option 060 designates a 6.0 meters (19.7 feet) cable length, forming a matched 7.0 or 9.0 meters system when combined with the corresponding probe.
• Option 02 includes standard cable pre-equipped with a fluorosilicone connector protector to seal and guard the connector joint against environmental contaminants.
• Option 05 provides hazardous area approvals including CSA, ATEX, and IECEx certifications.
• Gold-plated brass and beryllium copper ClickLoc connectors provide positive locking with simple finger-tightening.
• Fluorinated Ethylene Propylene (FEP) cable insulation and outer jacket provide chemical, oil, and moisture resistance.
• Cable electrical resistance measures 1.32 ohms +/- 0.21 ohms for the core conductor and 0.39 ohms +/- 0.08 ohms for the outer jacket conductor over the 6.0 meters length.

Applications

• Shaft vibration and axial position measurement on high-speed rotating machinery.
• Turbine, generator, compressor, and pump protective monitoring systems.
• Environments requiring certified electrical apparatus for explosive or hazardous gas zones.
• Machinery installations exposed to lubricating oils, hydraulic fluids, and severe moisture.

Ordering Information

Option Code	Value on This SKU	Description
Orderable Part Number	330130-060-02-05	3300 XL Standard Extension Cable, 6.0 m length, standard cable with connector protector, CSA/ATEX/IECEx approved
A - Cable Length Option	060	6.0 meters (19.7 feet)
B - Connector Protector and Cable Option	02	Standard cable with connector protector
C - Agency Approval Option	05	CSA, ATEX, IECEx approvals

Technical Specifications

Manufacturer	Bently Nevada
Part Number / Model	330130-060-02-05
Product Type	3300 XL Standard Extension Cable
Cable Length	6.0 meters (19.7 feet)
Cable Type	Standard triaxial coaxial cable with FEP insulation
Connector Option	Standard cable with connector protector (Option 02)
Connector Material	Gold-plated brass and gold-plated beryllium copper
Core Conductor Resistance	1.32 ohms +/- 0.21 ohms (typical)
Outer Jacket Resistance	0.39 ohms +/- 0.08 ohms (typical)
Cable Capacitance	69.9 pF/m (21.3 pF/ft) typical
Operating Temperature	-52 degC to +177 degC
Storage Temperature	-52 degC to +177 degC
Agency Approvals	CSA, ATEX, IECEx (Option 05)
Outside Diameter of Cable	3.7 mm maximum
Outside Diameter of Connector Protector	12.4 mm maximum
Weight	0.25 kg
Dimensions	200 mm x 200 mm x 30 mm (H x W x D)

Connections and Interfaces

Connector End	Connector Type	Function
Probe Connection End	Miniature female coaxial ClickLoc	Connects to the miniature male coaxial connector of the proximity probe
Sensor Connection End	Miniature male coaxial ClickLoc	Connects to the female coaxial connector of the Proximitor sensor

Installation Guidelines

• Verify that the combined length of the proximity probe and the 6.0 m extension cable equals the calibrated system length specified on the Proximitor sensor label.
• Tighten the coaxial ClickLoc connectors finger-tight until they physically click; do not use mechanical tools.
• Slide and fully seat the fluorosilicone connector protector sleeve over the mated connector joint to establish a moisture-proof seal.
• Observe a minimum bend radius of 25.4 mm (1.0 inch) for the FEP coaxial cable during routing.
• Secure the extension cable using non-conductive, oil-resistant cable ties or protective conduit to prevent physical wear and high-voltage interference.

Compliance and Certifications

• CSA Certified: Class I, Division 1 and 2, Groups A, B, C, D; Class II, Division 1 and 2; Class III
• ATEX/IECEx: Zone 0, Zone 1, and Zone 2 explosive gas atmospheres
• RoHS Compliant