Description

Option X1 (DIN mount) and custom target material calibration Option 01 under MODEL 145193 specify this 3300 XL 5mm/8mm 9m Proximitor configuration — 330180-X1-05MODEL145193-01. This specialized 3300 XL Proximitor Sensor conditions and drives proximity probe signals, providing a proportional voltage displacement output directly to machinery protection systems. Unlike standard sensors calibrated for standard AISI 4140 steel target materials, this model incorporates a factory recalibration (MODEL 145193-01) for precise compatibility with a non-standard shaft target material, preventing measurement deviations caused by alternative material permeability and electrical conductivity. It is equipped with multiple agency approvals (Option 05) to support installation within restricted hazardous environments.

The Proximitor module represents a vital link in machinery protection systems, translating physical shaft displacement into dynamic electrical outputs. The integrated DIN-rail mount modification allows for high-density, standardized panel layout configuration, simplifying cabinet wiring in power generation and petrochemical process monitoring environments. Factory testing ensures that the electrical zero, scale factor, and calibration tolerances align perfectly with the target shaft specifications as specified under Bently Nevada drawing and BOM reference 145193.

Features

• Option X1 modification specifies an integrated DIN-rail mount adapter bracket for rapid panel mounting.
• Option 05 provides multiple hazardous location agency approvals, including CSA, ATEX, and IECEx standards.
• MODEL 145193-01 factory recalibration matches alternative target materials to eliminate electrical runout and scale factor errors.
• Fully compatible with standard 3300 XL 5mm and 8mm 9-meter proximity probes and extension cables.
• Internal solid-state oscillator and signal demodulator circuitry are housed inside a robust shielding enclosure to reject electromagnetic interference.

Applications

• Shaft radial vibration and axial position monitoring on high-speed turbines, compressors, motors, and industrial pumps.
• Hazardous-area rotating machinery installations in oil, gas, chemical, and steam/gas power plants.
• Retrofit calibration projects where the rotor shaft target material differs from standard AISI 4140 steel.

Ordering Information

Technical Specifications

Installation Guidelines

• Mount the module firmly to standard 35 mm DIN-rails in a clean, weather-protected cabinet enclosure.
• Ensure the target shaft material matches the specific factory recalibration (MODEL 145193-01) to keep scale factor error within acceptable tolerances.
• Keep proximity probe and extension cable routing separated from high-voltage AC cables to minimize cross-talk and noise injection.
• Ground the sensor shield correctly at the receiver/monitor system end only to prevent loop current issues.

Compliance and Certifications

• CSA Class I, Division 1 and 2 Groups A, B, C, and D hazardous location approvals
• ATEX intrinsically safe Ex ia and non-sparking Ex nA industrial certifications
• IECEx hazardous area compliance for international explosive environments