Bently Nevada 330730-080-03-05 3300 XL 11 mm Extension Cable

SKU 330730-080-03-05

In stock

12-month warranty
Free returns within 30 days

Manufacturer: Bently Nevada
Product No.: 330730-080-03-05
Country of origin:United States
Product Type: 3300 XL 11 mm Extension Cable
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 180g
Dimensions: 50 mm x 100 mm x 100 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months

Description

Option 080 (8.0 meters length), Option 03 (armored cable with connector protector), and Option 05 (multiple agency approvals) specify the configuration of this 3300 XL 11 mm Extension Cable — 330730-080-03-05.

This cable configuration features an integrated FEP-coated stainless steel armor jacket that provides physical protection in abrasive industrial environments. The miniature coaxial ClickLoc connectors are equipped with fluorosilicone connector protectors to shield the electrical connection from moisture, dust, and turbine oil. Operating as an electrical bridge within the 3300 XL 11 mm transducer system, it provides a precise 75 ohm coaxial pathway for high-frequency signal transmission between the proximity probe and the Proximitor sensor.

Features

8.0 Meter Length: Designed specifically to achieve the proper calibration distance within 9.0 meter system configurations when paired with a 1.0 meter proximity probe.
FEP-Coated Armor: Covered in a stainless steel armor jacket with a protective FEP outer wrap to resist mechanical wear and physical impact.
Connector Protectors: Pre-installed fluorosilicone boots guard male and female connections against fluid ingress and accidental disconnects.
Standard Coaxial Design: Features a nominal 75 ohm characteristic impedance to maintain signal integrity without attenuation or phase distortion.
Hazardous Area Rating: Configured with multiple global approvals suitable for deployment in zones requiring intrinsic safety or non-incendive parameters.

Applications

Turbine and compressor shaft vibration and axial position monitoring.
Ramp differential expansion measurements on industrial steam turbines.
Rod position or rod drop detection on reciprocating compressors.
Tachometer, phase reference (Keyphasor), and zero speed sensing applications.

Ordering Information

Option Segment	Selected Code	Description / Parameter Meaning
Base Model	330730	3300 XL 11 mm Extension Cable
A - Cable Length Option	080	8.0 meters (26.2 feet)
B - Connector and Cable Option	03	Armored cable with connector protector
C - Agency Approval Option	05	Multiple Approvals (CSA, ATEX, IECEx)

Technical Specifications

Parameter	Specification Value
Manufacturer	Bently Nevada (Baker Hughes)
Part Number	330730-080-03-05
Transducer System Compatibility	3300 XL 11 mm Proximity Transducer System
Total Cable Length	8.0 meters (26.2 feet)
Cable Impedance	75 ohms (nominal)
Armor Construction	FEP-coated stainless steel armor
Armor Maximum Outer Diameter	7.6 mm (0.30 in)
Coaxial Cable Outer Diameter	3.7 mm (0.15 in) maximum
Connector Type	Miniature coaxial ClickLoc (coaxial conductor to coaxial conductor)
Connector Material	Gold-plated brass with fluorosilicone protector boot
Conductor DC Resistance (Rjacket)	2.0 +/- 0.5 ohms (coaxial conductor to coaxial conductor)
Conductor DC Resistance (Rcore)	0.6 +/- 0.2 ohms (center conductor to center conductor)
Cable Capacitance	69.9 pF/m (21.3 pF/ft) typical
Operating and Storage Temperature	-52 degC to +177 degC (-62 degF to +351 degF)
Relative Humidity	100% condensing, non-submersible (when connectors are protected)
Cable Weight (Armored)	140 g/m (1.5 oz/ft)

Installation Guidelines

System Length Matching: Ensure that the sum of the extension cable length (8.0 meters) and the probe length (1.0 meter) matches the calibrated length of the 9.0 meter Proximitor sensor.
Bending Radius: Do not bend the armored cable below the recommended minimum bend radius of 30.5 mm (1.2 in) to avoid damaging the internal coaxial core.
Connector Handling: Keep connectors dry and clean during installation. Only use approved, residue-free contact cleaners if cleaning is necessary.
Connector Protection: Fully slide the pre-installed fluorosilicone connector protectors over the junction to seal it. Do not apply silicone tape if the connection will be exposed to turbine oils.

Compliance and Certifications

Certification Authority	Approval Classification
ATEX / IECEx (ia)	Ex ia IIC T5...T1 Ga; Ex ia IIIC T90 degC...T280 degC Dc (for EPL Dc)
ATEX / IECEx (nA, ec)	Ex nA IIC T5...T1 Gc; Ex ec IIC T5...T1 Gc
North America (cNRTLus - ia)	Class I, Zone 0, AEx/Ex ia IIC T5...T1 Ga; Class I, Div 1, Groups A, B, C, D; Class II, Groups E, F, G; Class III
North America (cNRTLus - nA, ec)	Class I, Zone 2, AEx/Ex nA IIC T4/T5 Gc; Class I, Zone 2, AEx/Ex ec IIC T4/T5 Gc; Class I, Div 2, Groups A, B, C, D
European Directive Compliance	CE Mark, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU

FAQ

What is the length of the Bently Nevada 330730-080-03-05 extension cable?

This extension cable is 8.0 meters (26.2 feet) long, as designated by the -080 option code.

What does the -03 option code specify on this extension cable?

The -03 option code specifies that the cable is equipped with FEP-coated stainless steel armor and includes fluorosilicone connector protectors on the miniature ClickLoc coaxial connectors.

What hazardous area ratings are included with the -05 agency approval?

The -05 option represents multiple approvals, providing certified safety compliance from ATEX, IECEx, and CSA for installation in hazardous environments.

Which probes and sensors is this 8.0-meter cable compatible with?

This cable is compatible with Bently Nevada 3300 XL 11 mm systems. It must be paired with a 1.0-meter probe to achieve the total 9.0-meter system length required by the Proximitor sensor.

View all FAQs →

Product Documentation

Technical Datasheet (PDF) Complete specifications and technical drawings.

1 / 3

Quantity

Call sales Contact

Shipping & Returns

Global Express Shipping

Standard Delivery: 4–6 business days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our technical warranty.

Reviews

1 3

Only 4 item(s) left in stock

Quantity

View full details

Global Express Shipping

Standard Delivery: 4-6 Business Days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries, including rapid delivery to Saudi Arabia and UAE.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our professional technical warranty.

Orders are processed and delivered Monday-Friday (excluding public holidays).

For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .

TECHNICAL SPECIFICATIONS

Country of origin