Manufacturer: Bently Nevada
Product No.: 330880-28-30-37-01-02
Country of origin:United States
Product Type: Proximity Transducer Assemblies
Payment: T/T, Western Union
Weight: 320g
Shipping port: Xiamen
Warranty: 12 months
Designed for direct mounting on heavy rotating machinery cases, the Bently Nevada 330880-28-30-37-01-02 integrated PROXPAC XL assembly houses a high-precision proximity probe within a rugged, weather-resistant enclosure. This specific hardware configuration integrates a 3300 XL 8 mm proximity probe designed with multiple hazardous area approvals to provide continuous, non-contact shaft vibration, position, and speed measurements in demanding industrial settings. By combining the probe, standoff adapter, and conduit connection into a single modular unit, this assembly simplifies field deployment and protects sensitive sensor connections from environmental degradation.
| Parameter / Feature | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Model Code | 330880-28-30-37-01-02 |
| Product Series | PROXPAC XL |
| Probe & Approvals Option | 3300 XL 8 mm probe with multiple approvals (Option 28) |
| Standoff Adapter Option (B Dimension) | 3.0 inches (76 mm) (Option 30) |
| Probe Penetration Option (C Dimension) | 3.7 inches (94 mm) (Option 37) |
| Fittings Option | One 3/4-14 NPT fitting, two plugs (Option 01) |
| Mounting Thread Option | 3/4-14 NPT (Option 02) |
| Net Weight | 1.44 kg (3.17 lbs) |
| Shipping Weight (Calculated) | 3.00 kg (6.61 lbs) |
| Country of Origin | United States (USA) |
The PROXPAC XL series combines the probe and physical protective junction box into a single mechanical structure. This model is engineered to interface directly with matching 3300 XL Proximitor Sensors. Ensure that the total system electrical length (typically 5.0 meters or 9.0 meters) is matched across the probe, extension cable, and Proximitor to maintain calibration integrity (normally 200 mV/mil or 7.87 V/mm).
Incorrect selection of the B (standoff) and C (penetration) dimensions can result in the probe tip physically impacting the target shaft or being recessed too far inside the machine casing to achieve an active linear range. Engineers must calculate the total casing wall thickness, including gasket tolerances, and verify that the 3.7-inch probe penetration depth aligns correctly with the target's mechanical travel envelope under all thermal operating conditions.
When routing coaxial lines through the 3/4-14 NPT conduit fitting, do not exceed the minimum bend radius of the miniature coaxial cable. Avoid using harsh mechanical tools to tighten the internal gold-plated ClickLoc connectors, as over-tightening can deform the physical contact pins and lead to signal attenuation or intermittent calibration faults.
CRITICAL WARNING: De-energize and lock out the target machinery before installing or adjusting the proximity transducer assembly. Verify that the ambient atmosphere is classified as non-hazardous before opening the housing cover or adjusting the mechanical standoff settings while machinery is active.
Verify that the 3/4-14 NPT mounting threads on both the machine case and the PROXPAC adapter are clean, burr-free, and treated with compatible thread sealant.
Thread the standoff adapter into the machinery casing, tightening to the specified torque limit to prevent loose mechanical oscillation during operation.
Use a calibrated digital multimeter to monitor the DC gap voltage at the Proximitor Sensor terminals while carefully adjusting the probe position until the target mechanical midpoint (typically -10.0 Vdc) is reached.
Tighten the physical locknut, plug any unused conduit openings with the supplied NPT plugs, and secure the weatherproof cover to complete the installation.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A practical commissioning sequence for KEPServerEX OPC UA connections: define data ownership, test tags locally, configure endpoint and certificate trust, limit access, then verify failure recovery...
Commissioning an Ethernet-connected PLC often starts with the laptop, not the controller. Learn how to record existing settings, choose a temporary address, test connectivity, and restore the plant...
Combustible dust controls require more than alarms. Learn how to map dust generation, select instrumentation, design interlocks, handle failed feedback, test safe states, and maintain the full...
Hairpin windings raise slot fill and support compact traction motors, but conductor geometry, AC losses, insulation damage, weld quality, and cooling determine whether the design meets its targets.
Use Ansible to standardize SCADA server changes without expanding OT risk. This guide covers inventories, idempotent playbooks, staged testing, credentials, logging, and practical rollback controls.
A VPN encrypts the path to an industrial network, but secure remote PLC work also needs identity controls, segmented access, change approval, logging, safe operating boundaries, and tested recovery...
