Fully threaded M10x1 metric probe body with a 70 mm overall case length and a 1.0 m standard coaxial cable specifies the 330905-00-07-10-02-00 configuration of this Bently Nevada 3300 NSv Proximity Probe. This proximity probe is designed as an unarmored sensor used within the 3300 XL NSv Proximity Transducer System to provide non-contact displacement measurements. It is optimized for installations with tight mechanical clearances, reduced sideview targets, or small counterbores where standard 5 mm and 8 mm probes cannot fit due to physical spatial constraints.
By utilizing eddy-current measurement principles, the probe operates reliably in challenging industrial environments. This configuration pairs with a 330930-series extension cable and a 330980 Proximitor Sensor to deliver a linear voltage output directly proportional to the gap distance. Unlike armored variants, this unarmored design offers greater routing flexibility for internal machinery wiring where mechanical abrasion from exposed casing edges is not a primary concern.
This proximity probe is typically deployed in power generation, oil and gas, and petrochemical facilities. Specific applications include:
| Option Segment | Code Value | Meaning / Specification |
|---|---|---|
| Base Model | 330905 | 3300 NSv Proximity Probe, M10x1 metric thread, without armor |
| A - Unthreaded Length | 00 | 0 mm unthreaded length (fully threaded case) |
| B - Case Length | 07 | 70 mm overall case length |
| C - Total Length | 10 | 1.0 meter (3.9 feet or 39 inches) |
| D - Connector and Cable | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval | 00 | No agency approvals required |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / Model | 330905-00-07-10-02-00 |
| System Type | 3300 XL NSv Proximity Transducer System |
| Thread Size | M10x1 metric thread (unarmored) |
| Linear Range | 1.5 mm (60 mils), from approximately 0.25 mm (10 mils) to 1.75 mm (70 mils) |
| Average Scale Factor | 7.87 V/mm (200 mV/mil) +/- 12.5% over ambient range |
| Calibration Standard | AISI 4140 steel target (diameter 31 mm or larger) |
| Recommended Gap | 1.0 mm (40 mils) |
| Probe dc Resistance | 4.2 ohm +/- 0.5 ohm (center conductor to outer conductor) |
| System Input Voltage | Requires -17.5 Vdc to -26 Vdc (supplied via Proximitor Sensor) |
| Frequency Response | 0 to 10 kHz: +0, -3 dB |
| Deviation from Best Fit Straight Line (DSL) | Less than +/- 0.06 mm (+/- 2.3 mils) |
| Operating Temperature | 0 degC to +45 degC (32 degF to 113 degF) for full system specification |
| Connection Point | Interface Type | Function |
|---|---|---|
| Probe Tip | Inductive eddy-current sensor tip | Detects distance relative to conductive metal target (e.g., AISI 4140 steel) |
| Probe Termination | Miniature male coaxial ClickLoc connector | Connects to the female ClickLoc connector of a 3300 NSv extension cable |
| Cable Type | 75 ohm coaxial cable, unarmored | Transmits high-frequency sensor signal with low electrical noise and stable impedance |
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330905-00-07-10-02-00
Country of origin:United States
Product Type: 3300 NSv Proximity Probes
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Fully threaded M10x1 metric probe body with a 70 mm overall case length and a 1.0 m standard coaxial cable specifies the 330905-00-07-10-02-00 configuration of this Bently Nevada 3300 NSv Proximity Probe. This proximity probe is designed as an unarmored sensor used within the 3300 XL NSv Proximity Transducer System to provide non-contact displacement measurements. It is optimized for installations with tight mechanical clearances, reduced sideview targets, or small counterbores where standard 5 mm and 8 mm probes cannot fit due to physical spatial constraints.
By utilizing eddy-current measurement principles, the probe operates reliably in challenging industrial environments. This configuration pairs with a 330930-series extension cable and a 330980 Proximitor Sensor to deliver a linear voltage output directly proportional to the gap distance. Unlike armored variants, this unarmored design offers greater routing flexibility for internal machinery wiring where mechanical abrasion from exposed casing edges is not a primary concern.
This proximity probe is typically deployed in power generation, oil and gas, and petrochemical facilities. Specific applications include:
| Option Segment | Code Value | Meaning / Specification |
|---|---|---|
| Base Model | 330905 | 3300 NSv Proximity Probe, M10x1 metric thread, without armor |
| A - Unthreaded Length | 00 | 0 mm unthreaded length (fully threaded case) |
| B - Case Length | 07 | 70 mm overall case length |
| C - Total Length | 10 | 1.0 meter (3.9 feet or 39 inches) |
| D - Connector and Cable | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval | 00 | No agency approvals required |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / Model | 330905-00-07-10-02-00 |
| System Type | 3300 XL NSv Proximity Transducer System |
| Thread Size | M10x1 metric thread (unarmored) |
| Linear Range | 1.5 mm (60 mils), from approximately 0.25 mm (10 mils) to 1.75 mm (70 mils) |
| Average Scale Factor | 7.87 V/mm (200 mV/mil) +/- 12.5% over ambient range |
| Calibration Standard | AISI 4140 steel target (diameter 31 mm or larger) |
| Recommended Gap | 1.0 mm (40 mils) |
| Probe dc Resistance | 4.2 ohm +/- 0.5 ohm (center conductor to outer conductor) |
| System Input Voltage | Requires -17.5 Vdc to -26 Vdc (supplied via Proximitor Sensor) |
| Frequency Response | 0 to 10 kHz: +0, -3 dB |
| Deviation from Best Fit Straight Line (DSL) | Less than +/- 0.06 mm (+/- 2.3 mils) |
| Operating Temperature | 0 degC to +45 degC (32 degF to 113 degF) for full system specification |
| Connection Point | Interface Type | Function |
|---|---|---|
| Probe Tip | Inductive eddy-current sensor tip | Detects distance relative to conductive metal target (e.g., AISI 4140 steel) |
| Probe Termination | Miniature male coaxial ClickLoc connector | Connects to the female ClickLoc connector of a 3300 NSv extension cable |
| Cable Type | 75 ohm coaxial cable, unarmored | Transmits high-frequency sensor signal with low electrical noise and stable impedance |
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
PID tuning becomes safer when engineers can see how proportional, integral, and derivative actions reshape error, output, and response over time. This guide turns live trends into a disciplined...
A linear axis should be proven mechanically before aggressive tuning begins. This commissioning workflow covers scaling, direction, limits, homing, STO, low-speed tests, and evidence-based tuning for...
Interposing relays protect PLC and DCS interfaces by separating voltage domains, matching output capacity to field loads, and making faults easier to isolate. This guide explains selection,...
Input filtering can stabilize PLC data, but excessive smoothing delays alarms and masks process changes. Learn how to diagnose noise, select hardware or software filters, and validate response time.
SCR and PWM drives regulate brushed DC motors differently. Compare current ripple, low-speed torque, field control, feedback, reversing, braking energy, electromagnetic effects, and retrofit risks...
Industrial inverters synthesize controlled AC from a DC bus, but reliable operation depends on PWM, motor control, cable effects, braking energy, thermal limits, protection, and commissioning across...
