330906-02-12-10-02-00: 3300 NSv Reverse Mount Probe with 3/8-24 UNF-2A threads, featuring a 0.2-inch unthreaded length, a 1.2-inch overall case length, a 1.0-meter total cable length, standard ClickLoc coaxial connectors, and no agency approvals. This eddy-current proximity probe is used in 3300 XL NSv transducer systems to perform non-contact shaft vibration and axial position measurements in rotating machinery with limited target size or tight clearances. The reverse-mount configuration is engineered for installations where the probe must be threaded from the rear of the mounting bracket or sleeve, keeping the cable connection protected within the machine casing.
The 330906 model operates with an average scale factor of 7.87 V/mm (200 mV/mil) over a 1.5 mm (60 mils) linear range. This specific variant is supplied with a 1.0-meter standard coaxial cable without stainless steel armor or external connector protectors. It pairs directly with the 3300 NSv extension cable (330930) and 3300 XL NSv Proximitor Sensor (330980) to form a complete 5-meter or 7-meter transducer system calibrated to AISI 4140 steel targets.
| Option Segment | Code Value | Description |
|---|---|---|
| Orderable Part Number | 330906-02-12-10-02-00 | 3300 NSv Reverse Mount Probe, 3/8-24 UNF threads |
| A - Unthreaded Length Option | 02 | 0.2 in (5.08 mm) unthreaded length |
| B - Overall Case Length Option | 12 | 1.2 in (30.48 mm) overall case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total cable length |
| D - Connector Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | No agency approvals required |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model / Part Number | 330906-02-12-10-02-00 |
| System Compatibility | 3300 XL NSv Proximity Transducer System |
| Measurement Type | Non-contact eddy-current displacement |
| Thread Type | 3/8-24 UNF-2A threads |
| Mounting Configuration | Reverse mount |
| Linear Range | 1.5 mm (60 mils), from 0.25 to 1.75 mm (10 to 70 mils) |
| Average Scale Factor (ASF) | 7.87 V/mm (200 mV/mil) |
| Frequency Response | 0 to 10 kHz: +0, -3 dB typical with up to 305 m (1000 ft) of field wiring |
| Target Material Calibration | AISI 4140 steel (standard factory calibration) |
| Recommended Target Size | Minimum 8.9 mm (0.35 in) diameter; Recommended 13 mm (0.5 in) diameter |
| Probe DC Resistance | 4.2 ohms +/- 0.5 ohms (between center conductor and outer shield) |
| Operating / Storage Temperature | -52 degC to +177 degC (-62 degF to +351 degF) |
| Humidity Limits | 100% condensing, non-submersible (when connectors are protected) |
| Probe Pressure Seal | Sealed with Viton O-ring between probe tip and case |
| Maximum Case Torque | 22.6 N-m (200 in-lb) for reverse-mount probes |
| Recommended Connection Torque | Finger tight plus max 0.56 N-m (5 in-lb) connector-to-connector |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
Ensure the 330906-02-12-10-02-00 reverse-mount probe is threaded into a 3/8-24 UNF-2A tapped hole from the rear of the mounting bracket or sleeve. Tighten the probe casing to a recommended torque of 7.5 N-m (66 in-lb), taking care not to exceed the absolute maximum limit of 22.6 N-m (200 in-lb). The probe gap must be set using a voltmeter at 1.0 mm (40 mils) from the target surface for optimal linear range response. Keep ClickLoc connectors clean, dry, and free of turbine oil or moisture. Route the standard coaxial cable with a minimum bend radius of 25.4 mm (1.0 in) to prevent internal conductor damage.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330906-02-12-10-02-00
Country of origin:United States
Product Type: 3300 NSv Reverse Mount Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330906-02-12-10-02-00: 3300 NSv Reverse Mount Probe with 3/8-24 UNF-2A threads, featuring a 0.2-inch unthreaded length, a 1.2-inch overall case length, a 1.0-meter total cable length, standard ClickLoc coaxial connectors, and no agency approvals. This eddy-current proximity probe is used in 3300 XL NSv transducer systems to perform non-contact shaft vibration and axial position measurements in rotating machinery with limited target size or tight clearances. The reverse-mount configuration is engineered for installations where the probe must be threaded from the rear of the mounting bracket or sleeve, keeping the cable connection protected within the machine casing.
The 330906 model operates with an average scale factor of 7.87 V/mm (200 mV/mil) over a 1.5 mm (60 mils) linear range. This specific variant is supplied with a 1.0-meter standard coaxial cable without stainless steel armor or external connector protectors. It pairs directly with the 3300 NSv extension cable (330930) and 3300 XL NSv Proximitor Sensor (330980) to form a complete 5-meter or 7-meter transducer system calibrated to AISI 4140 steel targets.
| Option Segment | Code Value | Description |
|---|---|---|
| Orderable Part Number | 330906-02-12-10-02-00 | 3300 NSv Reverse Mount Probe, 3/8-24 UNF threads |
| A - Unthreaded Length Option | 02 | 0.2 in (5.08 mm) unthreaded length |
| B - Overall Case Length Option | 12 | 1.2 in (30.48 mm) overall case length |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total cable length |
| D - Connector Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval Option | 00 | No agency approvals required |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model / Part Number | 330906-02-12-10-02-00 |
| System Compatibility | 3300 XL NSv Proximity Transducer System |
| Measurement Type | Non-contact eddy-current displacement |
| Thread Type | 3/8-24 UNF-2A threads |
| Mounting Configuration | Reverse mount |
| Linear Range | 1.5 mm (60 mils), from 0.25 to 1.75 mm (10 to 70 mils) |
| Average Scale Factor (ASF) | 7.87 V/mm (200 mV/mil) |
| Frequency Response | 0 to 10 kHz: +0, -3 dB typical with up to 305 m (1000 ft) of field wiring |
| Target Material Calibration | AISI 4140 steel (standard factory calibration) |
| Recommended Target Size | Minimum 8.9 mm (0.35 in) diameter; Recommended 13 mm (0.5 in) diameter |
| Probe DC Resistance | 4.2 ohms +/- 0.5 ohms (between center conductor and outer shield) |
| Operating / Storage Temperature | -52 degC to +177 degC (-62 degF to +351 degF) |
| Humidity Limits | 100% condensing, non-submersible (when connectors are protected) |
| Probe Pressure Seal | Sealed with Viton O-ring between probe tip and case |
| Maximum Case Torque | 22.6 N-m (200 in-lb) for reverse-mount probes |
| Recommended Connection Torque | Finger tight plus max 0.56 N-m (5 in-lb) connector-to-connector |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
Ensure the 330906-02-12-10-02-00 reverse-mount probe is threaded into a 3/8-24 UNF-2A tapped hole from the rear of the mounting bracket or sleeve. Tighten the probe casing to a recommended torque of 7.5 N-m (66 in-lb), taking care not to exceed the absolute maximum limit of 22.6 N-m (200 in-lb). The probe gap must be set using a voltmeter at 1.0 mm (40 mils) from the target surface for optimal linear range response. Keep ClickLoc connectors clean, dry, and free of turbine oil or moisture. Route the standard coaxial cable with a minimum bend radius of 25.4 mm (1.0 in) to prevent internal conductor damage.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A practical engineering guide to PLC CPU operation, from deterministic scan cycles and I/O image tables to memory, communications, diagnostics, redundancy, processor sizing, and reliable system...
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
