An unarmored 3/8-24 UNF threaded probe body featuring a 2.1 in unthreaded length (Option 21), a 3.5 in overall case length (Option 35), and a 1.0 m total length (Option 10) specifies this 330908-21-35-10-02-00 3300 NSv proximity probe configuration. This non-contact eddy-current displacement sensor is designed specifically for tight clearances and reduced target areas where standard 8 mm probes cannot fit. The 3300 NSv series operates as a direct interface with high-speed, small-bore machinery components, offering precise dynamic and static measurements of shaft vibration and axial position.
Compared to the armored 330909 variant, this unarmored configuration offers greater flexibility in clean conduit paths and tight installation environments. The coaxial cable is terminated with a gold-plated miniature ClickLoc connector (Option 02) to maintain a secure mechanical connection and electrical signal integrity with a 330930 extension cable and a 330980 Proximitor sensor. This specific model is configured with no hazardous area approvals (Option 00), making it suitable for standard safe-area industrial machinery applications.
| Option / Segment | Code on This SKU | Meaning / Description |
|---|---|---|
| Base Model | 330908 | 3300 NSv Proximity Probe, 3/8-24 UNF thread, without armor |
| A: Unthreaded Length Option | 21 | 2.1 in (53 mm) unthreaded length (increments of 0.1 in) |
| B: Overall Case Length Option | 35 | 3.5 in (89 mm) overall case length (increments of 0.1 in) |
| C: Total Length Option | 10 | 1.0 meter (3.3 feet / 39 inches) |
| D: Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E: Agency Approval Option | 00 | Not required / No agency approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / SKU | 330908-21-35-10-02-00 |
| Product Series | 3300 XL NSv Proximity Transducer System |
| Thread Size | 3/8-24 UNF-2A |
| Armor Option | Without armor (unarmored) |
| Linear Range | 1.5 mm (60 mils), begins at approximately 0.25 mm (10 mils) from target |
| Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.06 mm (+/-2.3 mils) over linear range |
| System Compatibility | Requires 330930 extension cable and 330980 Proximitor sensor |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Cable Construction | 75 ohm coaxial, fluoroethylene propylene (FEP) insulated |
| Connector Type | Miniature male coaxial ClickLoc connector (gold-plated brass) |
| Tensile Strength | Maximum 220 N (50 lb) pull strength case-to-lead and lead-to-connector |
| Probe DC Resistance (R_probe) | 4.2 +/- 0.5 ohms (for 1.0 m length) |
| Operating Temperature (Probe) | -52 degC to +177 degC (-62 degF to +351 degF) |
| Sealing / Pressure Limit | Viton O-ring differential pressure seal between probe tip and case |
| Minimum Target Diameter | 9.5 mm (0.375 in) |
| Recommended Counterbore | 13 mm (0.5 in) minimum diameter |
To ensure precise displacement measurements, maintain a minimum probe gap of 1.0 mm (40 mils) representing the center of the 1.5 mm linear range. Secure the probe using appropriate mounting brackets or threaded ports with a torque not exceeding 11.3 N-m (100 in-lb) for 3/8-24 threaded cases. Do not exceed the maximum allowable thread engagement length of 0.563 inches to prevent case binding during assembly. Avoid bending the 75 ohm coaxial probe cable beyond its minimum bend radius of 25.4 mm (1.0 in). Standard ClickLoc connectors must be hand-tightened; do not exceed a maximum connector torque of 0.56 N-m (5 in-lb) to prevent damage to the gold-plated miniature fittings.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330908-21-35-10-02-00
Country of origin:United States
Product Type: 3300 NSv Proximity Probes
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
An unarmored 3/8-24 UNF threaded probe body featuring a 2.1 in unthreaded length (Option 21), a 3.5 in overall case length (Option 35), and a 1.0 m total length (Option 10) specifies this 330908-21-35-10-02-00 3300 NSv proximity probe configuration. This non-contact eddy-current displacement sensor is designed specifically for tight clearances and reduced target areas where standard 8 mm probes cannot fit. The 3300 NSv series operates as a direct interface with high-speed, small-bore machinery components, offering precise dynamic and static measurements of shaft vibration and axial position.
Compared to the armored 330909 variant, this unarmored configuration offers greater flexibility in clean conduit paths and tight installation environments. The coaxial cable is terminated with a gold-plated miniature ClickLoc connector (Option 02) to maintain a secure mechanical connection and electrical signal integrity with a 330930 extension cable and a 330980 Proximitor sensor. This specific model is configured with no hazardous area approvals (Option 00), making it suitable for standard safe-area industrial machinery applications.
| Option / Segment | Code on This SKU | Meaning / Description |
|---|---|---|
| Base Model | 330908 | 3300 NSv Proximity Probe, 3/8-24 UNF thread, without armor |
| A: Unthreaded Length Option | 21 | 2.1 in (53 mm) unthreaded length (increments of 0.1 in) |
| B: Overall Case Length Option | 35 | 3.5 in (89 mm) overall case length (increments of 0.1 in) |
| C: Total Length Option | 10 | 1.0 meter (3.3 feet / 39 inches) |
| D: Connector and Cable-Type Option | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E: Agency Approval Option | 00 | Not required / No agency approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number / SKU | 330908-21-35-10-02-00 |
| Product Series | 3300 XL NSv Proximity Transducer System |
| Thread Size | 3/8-24 UNF-2A |
| Armor Option | Without armor (unarmored) |
| Linear Range | 1.5 mm (60 mils), begins at approximately 0.25 mm (10 mils) from target |
| Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.06 mm (+/-2.3 mils) over linear range |
| System Compatibility | Requires 330930 extension cable and 330980 Proximitor sensor |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 304 stainless steel (SST) |
| Cable Construction | 75 ohm coaxial, fluoroethylene propylene (FEP) insulated |
| Connector Type | Miniature male coaxial ClickLoc connector (gold-plated brass) |
| Tensile Strength | Maximum 220 N (50 lb) pull strength case-to-lead and lead-to-connector |
| Probe DC Resistance (R_probe) | 4.2 +/- 0.5 ohms (for 1.0 m length) |
| Operating Temperature (Probe) | -52 degC to +177 degC (-62 degF to +351 degF) |
| Sealing / Pressure Limit | Viton O-ring differential pressure seal between probe tip and case |
| Minimum Target Diameter | 9.5 mm (0.375 in) |
| Recommended Counterbore | 13 mm (0.5 in) minimum diameter |
To ensure precise displacement measurements, maintain a minimum probe gap of 1.0 mm (40 mils) representing the center of the 1.5 mm linear range. Secure the probe using appropriate mounting brackets or threaded ports with a torque not exceeding 11.3 N-m (100 in-lb) for 3/8-24 threaded cases. Do not exceed the maximum allowable thread engagement length of 0.563 inches to prevent case binding during assembly. Avoid bending the 75 ohm coaxial probe cable beyond its minimum bend radius of 25.4 mm (1.0 in). Standard ClickLoc connectors must be hand-tightened; do not exceed a maximum connector torque of 0.56 N-m (5 in-lb) to prevent damage to the gold-plated miniature fittings.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
