Bently Nevada SCOUT100-Ex Asset Condition Vibration Data Monitor

Description

Bently Nevada SCOUT100-Ex is a portable dual-channel vibration data collector, analyzer, and balancer engineered for plant-wide machinery health monitoring and diagnostic routine routes. The device features 2-channel simultaneous analog recording capability, integrated Keyphasor tachometer input, and dynamic balancing functionality. Powered by a high-resolution 5.5-inch HVGA backlit display, it provides spectral resolution up to 6,400 lines and a frequency analysis range up to 40 kHz.

The SCOUT100-Ex integrates with condition monitoring software systems including System 1 Evolution and Ascent Level 2 for database management, route execution, bearing fault identification, and diagnostic reporting. Housed in an IP65 rated enclosure, it supports onboard data storage via 1 GB internal memory, USB memory transfers, and dual-plane balancing routines.

Features

• 2-channel simultaneous dynamic signal recording
• Keyphasor tachometer input support
• 2-plane dynamic field balancing capability
• 5.5-inch HVGA backlit LCD display
• Spectral analysis resolution up to 6,400 lines FFT
• Measurement frequency range up to 40 kHz Fmax
• 1 GB internal memory for waveform and spectra storage
• 10-hour battery operating life
• Ergonomic layout designed for left- and right-handed operation
• USB host port for data offload to external USB memory drives
• Supported recording types including Orbit Plot, Order Tracking, Time Synchronous Averaging, and Long Time Waveform

Applications

• Route-based vibration collection on industrial motors, pumps, fans, and compressors
• Dual-plane dynamic field balancing on rotating plant machinery
• Machinery fault diagnosis using orbit plots and order tracking analysis
• Hazardous area machinery condition monitoring

Technical Specifications

Installation Guidelines

• Cable Connections: Connect sensors to the channel inputs on the instrument top panel prior to initiating measurement routes. Ensure locking mechanisms on connectors are secured.
• Sensor Mounting: Attach accelerometers firmly to bearing housings using magnetic bases or direct mounting studs on clean, flat surfaces.
• Tachometer Setup: Position the optional Laser Tachometer on a magnetic stand aimed at reflective tape applied to the rotating shaft for Keyphasor phase measurements.
• Hazardous Area Usage: Verify ATEX Zone 2 area classification compliance prior to deploying the instrument in potentially explosive environments.

Compliance and Certifications

• Hazardous Area Certification: ATEX Zone 2 certified
• Environmental Enclosure Rating: IP65