Honeywell 10006/2/1 FSC Diagnostic and Battery Module

Description

Designed for seamless integration into Fail Safe Control (FSC) safety systems, the Honeywell 10006/2/1 serves as a reliable diagnostic and battery module (DBM). This unit, also referenced under part number 3400310, provides an engineered, cost-effective interface for diagnosing system health, executing runtime checks, and maintaining memory registers.

The module is equipped with an integrated real-time clock displaying minimal drift and a dedicated backup battery circuit to ensure continuous operation of critical system registers during power cycles. Engineered specifically for high-availability environments, variants bearing the 08801 suffix code feature enhanced electromagnetic noise immunity, making them highly suitable for electrically noisy industrial settings.

Features

• Provides a dedicated diagnostics interface for Honeywell FSC safety systems.
• Integrated real-time clock with an exceptionally low drift rate of less than 1 second per day.
• Onboard 0.5 Ah backup battery capacity to safeguard system configuration data.
• Enhanced noise immunity on units designated with suffix code 08801.
• Standard 3U height and 8 HP width form factor for simple rack integration.
• Compatible with FSC software versions 2.90 and higher.

Applications

• Emergency Shutdown Systems (ESD)
• Burner Management Systems (BMS)
• Fire and Gas Detection Systems
• Critical Process Safety control in Oil & Gas and Petrochemical plants

Technical Specifications

Installation Guidelines

• Electrostatic Discharge (ESD) Protection: Always wear an approved grounding wrist strap when handling the card to prevent ESD damage to delicate static-sensitive CMOS components.
• Chassis Mounting: Ensure the FSC rack chassis is powered down prior to inserting or removing the module to avoid diagnostic communication interruptions or backplane bus faults.
• Alignment: Slide the module carefully along the guide rails of the designated 3U subrack slot until the rear DIN connector is completely mated with the backplane. Secure the front panel using the integral retaining screws.
• Battery Commissioning: Check battery connection jumpers or software register states upon initial startup to verify that the 0.5 Ah backup circuit is fully engaged.

Compliance and Certifications

• CE Compliant
• TÜV Certified for Functional Safety
• UL Listed