Description

The Honeywell CC-PAON01 51410070-176 is a 16-channel non-HART Analog Output Module (AOM) designed for execution within the Experion PKS Series C I/O architecture. Operating on an IOLINK managed by a C300 controller, the module receives digital control commands from the controller software and generates precise, analog 4-20mA current signals to drive field actuators, control valves, positioners, and variable speed drives.

Engineered as a core component of the Experion PKS automation platform, the Honeywell CC-PAON01 51410070-176 occupies a dedicated slot on a compatible Input Output Termination Assembly (IOTA). It utilizes an IOM block designation of AO. The module features a vertical, tilted form factor optimized for cabinet heat dissipation, toolless field replacement, and seamless integration with single or redundant IOTA configurations.

Compared to earlier analog output variants such as the CC-PAOX01, the Honeywell CC-PAON01 51410070-176 represents an updated hardware baseline designed for non-HART loop control. In redundant implementations, paired modules share the control load and provide auto-failover, ensuring continuous output generation for critical process loops.

Features

• Features 16 independent analog output channels designed for standard non-HART 4-20mA process control loops.
• Uses the standardized AO IOM function block within Experion PKS Control Builder software.
• Connects directly to Experion C300 controllers over redundant IOLINK communications networks.
• Compatible with both non-redundant (CC-TAON01) and redundant (CC-TAON11) Series C I/O Termination Assemblies.
• Fast startup cycle capable of initializing in approximately 10 seconds following module-level power restoration.
• Supports high-density cabinet mounting with Series C vertical inclination for efficient thermal management.
• On-board diagnostic reporting continuously updates module status and hardware health to the Experion system.

Applications

• Final Control Element Driving: Delivers 4-20mA analog current signals to control valves, I/P converters, and electronic valve positioners.
• Speed Reference Signals: Sends continuous setpoint control signals to Variable Frequency Drives (VFDs) and motor control centers.
• Industrial Process Control Loops: Serves as the primary analog output interface for pressure, flow, temperature, and level regulation across process industries.
• DCS Upgrades and Expansions: Serves as the updated Series C module model for expanding or replacing legacy non-HART analog output channels.

Technical Specifications

Connections / Interfaces

Installation Guidelines

1. Model & Compatibility Check: Verify that the physical module part number (CC-PAON01 / 51410070-176) matches system design and that the destination IOTA is model CC-TAON01 (non-redundant) or CC-TAON11 (redundant).
2. Power & Safety: Ensure cabinet power distribution conforms to Honeywell Series C installation requirements. Keep the ESD grounding strap attached while handling the module.
3. Mechanical Mounting: Align the module guide pins with the dedicated slot on the IOTA board. Press firmly until the module latches securely into place.
4. Wiring Verification: Confirm that field loop wiring is properly connected to the screw terminals or field wiring connectors on the IOTA board prior to energizing.
5. System Initialization: Apply system power. The module will complete its internal diagnostic self-test and initialize within approximately 10 seconds.

Configuration & Replacement Recommendations

• Software Configuration: In Experion Control Builder, assign the module using the AO IOM function block. Ensure the corresponding IOLINK block is configured for Series C I/O communication.
• Legacy Model Migration: Note that CC-PAON01 is the designated updated model for the older CC-PAOX01 analog output module. Because CC-PAON01 and CC-PAOX01 cannot be mixed within a redundant pair, both modules in a redundant configuration must be updated simultaneously.
• Redundant Module Replacement: When replacing one module of an active redundant pair, verify that the active module is healthy. Insert the replacement module into the secondary slot on the CC-TAON11 IOTA. The controller will sync firmware and parameters to the new module automatically.