Optimized speed and torque regulation in heavy-duty automated machinery is achieved through the integration of the Omron 3G3MX2-A4055-ZV1 variable frequency drive. Representing the highly modular and compact MX2 Series, this industrial inverter is engineered to deliver dynamic three-phase 400 V AC motor control up to a capacity of 5.5 kW. With its integrated functional safety architecture and advanced vector control algorithms, the drive ensures stable performance under high starting torque demands, adapting seamlessly to complex machine environments.
| Specification Parameter | Value / Rating |
|---|---|
| Manufacturer | Omron |
| Model Number | 3G3MX2-A4055-ZV1 |
| Series Name | MX2 Series Multi-Function Compact Inverter |
| Input Voltage Class | 3-Phase 380 to 480 V AC (+10% / -15%), 50/60 Hz |
| Max Applicable Motor Capacity (CT) | 5.5 kW (Heavy Duty) |
| Enclosure Rating | IP10 Minimum (Panel-mounting) |
| Communication Interface | Modbus RTU (via built-in RJ45 physical layer) |
| Safety Standard | ISO13849-1 Cat. 3 / PLd Compliant |
| Net Weight | 3.5 kg |
| Shipping Weight (Calculated) | 6.0 kg |
The "ZV1" designation in the model number marks the standardized firmware revision equipped with permanent magnet (PM) motor vector control capability alongside induction motor control. This unit acts as a physical drop-in replacement for older non-ZV1 variants of the same 5.5 kW power frame size, though parameter mappings for safety loop configurations must be verified during system retrofit procedures.
During heavy-load, continuous duty operations, avoid placing the inverter in unventilated enclosures where internal temperatures exceed 40 degC without systematic derating. Maintaining a minimum clearance of 100mm both above and below the cooling heatsink is mandatory to prevent thermal trip warnings under sustained load profiles.
When setting up the Safe Torque Off (STO) circuit, ensure that the safety jumper between standard terminal ports is removed before wiring to external safety relays. It is highly recommended to run the motor feed cables through shielded conduits separated from low-level control and feedback signals to eliminate high-frequency electromagnetic interference.
Disconnect all primary power sources and verify zero potential across the DC bus terminals prior to initiating installation or maintenance. Wait a minimum of 10 minutes post-power de-energization to allow internal capacitors to safely discharge stored electrical charge.
Global Express Shipping
Returns & Warranty
Manufacturer: Omron
Product No.: 3G3MX2-A4055-ZV1
Country of origin:Japan
Product Type: Variable Frequency Drives
Payment: T/T, Western Union
Weight: 6000g
Shipping port: Xiamen
Warranty: 12 months
Optimized speed and torque regulation in heavy-duty automated machinery is achieved through the integration of the Omron 3G3MX2-A4055-ZV1 variable frequency drive. Representing the highly modular and compact MX2 Series, this industrial inverter is engineered to deliver dynamic three-phase 400 V AC motor control up to a capacity of 5.5 kW. With its integrated functional safety architecture and advanced vector control algorithms, the drive ensures stable performance under high starting torque demands, adapting seamlessly to complex machine environments.
| Specification Parameter | Value / Rating |
|---|---|
| Manufacturer | Omron |
| Model Number | 3G3MX2-A4055-ZV1 |
| Series Name | MX2 Series Multi-Function Compact Inverter |
| Input Voltage Class | 3-Phase 380 to 480 V AC (+10% / -15%), 50/60 Hz |
| Max Applicable Motor Capacity (CT) | 5.5 kW (Heavy Duty) |
| Enclosure Rating | IP10 Minimum (Panel-mounting) |
| Communication Interface | Modbus RTU (via built-in RJ45 physical layer) |
| Safety Standard | ISO13849-1 Cat. 3 / PLd Compliant |
| Net Weight | 3.5 kg |
| Shipping Weight (Calculated) | 6.0 kg |
The "ZV1" designation in the model number marks the standardized firmware revision equipped with permanent magnet (PM) motor vector control capability alongside induction motor control. This unit acts as a physical drop-in replacement for older non-ZV1 variants of the same 5.5 kW power frame size, though parameter mappings for safety loop configurations must be verified during system retrofit procedures.
During heavy-load, continuous duty operations, avoid placing the inverter in unventilated enclosures where internal temperatures exceed 40 degC without systematic derating. Maintaining a minimum clearance of 100mm both above and below the cooling heatsink is mandatory to prevent thermal trip warnings under sustained load profiles.
When setting up the Safe Torque Off (STO) circuit, ensure that the safety jumper between standard terminal ports is removed before wiring to external safety relays. It is highly recommended to run the motor feed cables through shielded conduits separated from low-level control and feedback signals to eliminate high-frequency electromagnetic interference.
Disconnect all primary power sources and verify zero potential across the DC bus terminals prior to initiating installation or maintenance. Wait a minimum of 10 minutes post-power de-energization to allow internal capacitors to safely discharge stored electrical charge.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Japan
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
