Honeywell 900P01-0101 ControlEdge HC900 Power Supply Module

Apenas 2 item(ns) restante(s) em estoque

Fabricante: Honeywell
Nº do Produto: 900P01-0101
País de origem:Estados Unidos
Tipo de Produto: Power Supply Modules
Pagamento: T/T, Western Union
Peso: 3000g
Porto de embarque: Xiamen
Garantia: 12 meses

Description

Power delivery for ControlEdge HC900 controller racks, local I/O expansions, or remote scanner configurations is managed by the Honeywell 900P01-0101 power supply module. This universal power supply provides stable 5V DC and 24V DC outputs to fulfill the precise energy demands of backplane-mounted controllers, communication modules, and I/O modules. With a 60-watt output capacity, it ensures optimal operational stability with minimal thermal de-rating requirements across industrial environments. Note that in modern control system upgrades, this module is directly replaced by the newer 900P01-0301 model variant.

The unit features a physical layout that emphasizes safety and maintainability. A tool-secured protective door shields the high-voltage input connections from accidental contact, while front-panel test jacks facilitate direct monitoring of both DC output rails. Overcurrent protection is maintained through an integrated, non-replaceable internal fuse, safeguarding upstream system components from critical fault conditions.

Features

Provides simultaneous 5 VDC and 24 VDC outputs to drive rack components and connected I/O interfaces.
Universal power input compatibility handles fluctuating operating voltages without requiring physical jumper adjustments.
60-Watt capacity ensures ample power overhead, reducing the need to de-rate available I/O configurations.
Accessible front-panel test jacks enable rapid diagnostic verification of system supply voltages.
Rugged screw-type terminal block accepts a wide range of industrial wire gauges.
Integrated protective cover prevents unauthorized or accidental exposure to line voltage.

Applications

Honeywell ControlEdge HC900 controller racks.
Local and remote I/O expansion chassis.
Redundant controller power system topologies.
Industrial manufacturing, process automation, and burner control infrastructure.

Technical Specifications

CategorySpecification ParameterValue / Rating

Manufacturer	Honeywell	900P01-0101
Product Series	ControlEdge HC900	Power Supply Module (P01)
Operating Input Voltage	Universal Power, 90 to 264 VAC	47 to 63 Hz
Input Rating	130 VA	60 W
Output Voltages	5 VDC and 24 VDC	7 Amps peak-to-peak for 150 ms at 240 VAC
Hold-up Time	20 milliseconds at 115 VAC, 60 Hz (maximum load)	Internal, non-replaceable
Wiring Terminals	Screw-type terminals	#12 to #22 AWG
Test Jacks	5 Volt, 24 Volt diagnostic ports	3.0 kg

Connections and Interfaces

Screw Terminals5V Test Jack24V Test Jack

Interface/Terminal Component	Function and Technical Parameters
AC Power Input (Line, Neutral, Protective Ground)
Direct front-panel point for measuring the 5 VDC rail
Direct front-panel point for measuring the 24 VDC rail

Installation Guidelines

Ensure all electrical power is completely disconnected before removing or installing the power supply module.
Route field wiring and power input connections through the dedicated terminal channel and secure the protective safety door with the designated retaining screw.
Strip field wiring according to standard electrical codes and verify torque limits on the screw terminals to prevent loose terminations.
Provide sufficient clearance within the rack enclosure to facilitate natural vertical convection cooling for optimal heat dissipation.

Key Features:

#Honeywell HC900 #Power Supply Modules

What is the primary function of the Honeywell 900P01-0101 power supply?

The Honeywell 900P01-0101 is designed to supply reliable 5VDC and 24VDC electrical power to system components in a ControlEdge HC900 rack, supporting controllers, local/remote I/O racks, or redundant controller chassis.

Does the 900P01-0101 module require any manual configuration for different AC line voltages?

No, it features a universal power input stage that automatically handles operating voltages ranging from 90 to 264 VAC at frequencies of 47 to 63 Hz.

What is the replacement part number for the 900P01-0101?

For newer installations or direct replacements, the module has transitioned to part number 900P01-0301.

What size of wiring should be used for the screw-type terminal connections?

The screw-type terminals on the power supply module are designed to accommodate wire gauges ranging from #12 to #22 AWG.

Are the diagnostic test jacks on the front panel safe to use during operation?

Yes, the 5V and 24V test jacks are designed for safe diagnostic access, allowing maintenance personnel to verify output rail stability while the system is powered.

Envio Expresso Global

Entrega Padrão: 4-6 dias úteis via DHL, FedEx e UPS.
Despacho Expresso: Envio no mesmo dia para pedidos em estoque realizados antes das 14:00 (GMT+8).
Cobertura Mundial: Atendendo mais de 150 países, incluindo entrega rápida para Arábia Saudita e Emirados Árabes Unidos.

Devoluções e Garantia

Garantia de 30 Dias: Devoluções aceitas para produtos em estoque na embalagem original, lacrada de fábrica.
Garantia de 12 Meses: Cada componente industrial é coberto pela nossa garantia técnica profissional.

Os pedidos são processados e entregues de segunda a sexta-feira (exceto feriados).

Para elegibilidade completa, taxas de reabastecimento e detalhes de devolução internacional, por favor, consulte nosso oficial Política de Reembolso e Devolução .

TECHNICAL SPECIFICATIONS

Country of origin

Honeywell 900P01-0101 ControlEdge HC900 Power Supply Module