Fabricante: Omron
Nº do Produto: CJ1W-EIP21
País de origem:Japão
Tipo de Produto: PLC Communication Modules
Pagamento: T/T, Western Union
Peso: 1500g
Dimensões: 90 mm x 31 mm x 65 mm
Porto de embarque: Xiamen
Garantia: 12 meses
Facilitating high-speed industrial Ethernet communications within modular control architectures, the Omron CJ1W-EIP21 functions as a CPU Bus Unit designed to interface PLC controllers directly with industrial EtherNet/IP networks. This unit enables both high-speed tag data links (implicit messaging) for real-time I/O control and message communications (explicit messaging) for explicit data exchange. Integrating seamlessly onto either local CPU racks or expansion racks, it bridges logical plant-floor control layers with supervisory SCADA, MES, or enterprise database environments without requiring dedicated external gateways.
| Manufacturer | Omron Industrial Automation |
| Model Number | CJ1W-EIP21 |
| Unit Classification | CJ-series CPU Bus Unit |
| Supported Platforms | NJ-series, CJ-series, CP1H-series PLCs |
| Physical Mounting Locations | CPU Rack, Expansion Rack |
| Maximum Units per System | NJ System: 4 max | CJ/NSJ System: 8 max | CP1H System: 2 max |
| Media Access Control (MAC) | CSMA/CD |
| Modulation Method | Baseband |
| Transmission Topology | Star formation (via switching hubs) |
| Baud Rate | 100 Mbit/s (100Base-TX) |
| Maximum Segment Distance | 100 meters (node to network switch/hub) |
| Internal Current Consumption | 410 mA maximum at 5 V DC |
| Dimensions (H x W x D) | 90 mm x 31 mm x 65 mm |
| Unit Weight | 0.094 kg (94 g) |
| Shipping Weight (Calculated) | 1.5 kg |
| Interface Component | Description / Pin Assignment |
|---|---|
| RJ45 Connector | Standard 8-pin modular connector for 100Base-TX Ethernet cable (Category 5/5e shielded twisted pair recommended). |
| Rotary Switches | Two hex decimal rotary switches (x16 and x1) located on the front panel to configure the hardware node IP address suffix. |
| LED Indicators | RUN (Green), ERC (Red), ERH (Red), MS (Green/Red), NS (Green/Red), LNK/ACT (Yellow). |
Based on industrial commissioning logs, the configuration and management of the CJ1W-EIP21 require precise adherence to network bandwidth constraints and configuration rules.
The CJ1W-EIP21 can directly replace older CJ1W-ETN21 Ethernet modules in legacy network topographies, though configuration steps differ. When migrating to an NJ-series controller platform, the unit's maximum allowable instances drop from 8 units (CJ-series limit) to 4 units due to increased backplane bandwidth demands. Ensure the unit's firmware matches the Sysmac Studio or CX-Programmer library version to avoid catalog mismatch faults during upload.
A common real-world failure mode occurs when Tag Data Link (implicit messaging) connections saturate the unit's maximum packet processing rate (PPS). Keep track of your packet limits using the Network Configurator tool. If the cumulative packet-per-second limit is exceeded, cyclic communications may time out, throwing an 'ERH' (EtherNet/IP Unit Error) status. To alleviate this, adjust the Requested Packet Interval (RPI) configurations upward for non-critical monitoring nodes.
To minimize high-frequency electrostatic interference on plant-floor environments, you must use double-shielded STP Cat 5e (or better) cabling. Clamp the shield securely to the rack's functional ground bar. When utilizing the rotary switches on the front bezel to set the IP address, note that the default hardware setting reads the node address as part of the Class C IP scheme (e.g., 192.168.250.X). If custom routing or non-standard subnets are required, set the rotary switches to '00' to enable software-configured IP parameters via CX-Programmer.
Align the top hook of the CJ1W-EIP21 module into the mounting slot of the CJ/NJ-series backplane.
Pivot the unit downward until the bottom connector snaps securely into the bus socket on the backplane.
Tighten the upper and lower mounting screws to secure the chassis. Ensure they are tightened to the recommended torque of 0.4 N-m.
Insert the RJ45 Ethernet patch cord until the locking tab clicks cleanly into place. Ensure proper strain relief is applied to prevent physical pull on the port.
Envio Expresso Global
Devoluções e Garantia
Os pedidos são processados e entregues de segunda a sexta-feira (exceto feriados).
Para elegibilidade completa, taxas de reposição e detalhes de devolução internacional, por favor, consulte nosso oficial Política de Reembolso e Devolução .
| Country of origin |
Japão
|
Este artigo explica como os atuadores elétricos integrados, como a série e-Actuator da SMC, estão transformando o controle de movimento industrial ao substituir os sistemas pneumáticos e hidráulicos...
Este artigo explica como os sistemas PLC realizam operações matemáticas básicas, como adição, subtração, multiplicação, divisão, módulo e exponenciação dentro da automação industrial. Ele mostra como...
O artigo explica várias funções avançadas de lógica Booleana usadas na programação de CLPs além das operações básicas AND, OR e NOT. Ele aborda como ferramentas como tabelas verdade, multiplexadores,...
A lógica booleana é a base de todo programa PLC. Desde controles simples de máquinas até sistemas complexos de automação industrial, as portas lógicas determinam como os controladores respondem a...
Firewalls industriais desempenham um papel crucial na cibersegurança OT, protegendo redes PLC, DCS e SCADA por meio de segmentação, controle de entrada/saída e integração IDS/IPS alinhada aos...
As garras robóticas modernas estão evoluindo além das tradicionais mandíbulas mecânicas. De sistemas adesivos inspirados em lagartos-gecko e garras macias de grau alimentício a ferramentas de armazém...
