Manufacturer: Weidmuller
Product No.: IE-GWT-MB-2TX-1RS232/485
Country of origin:เยอรมนี
Product Type: Modbus Gateways
Payment: T/T, Western Union
Weight: 1000g
Dimensions: 29 mm x 124.5 mm x 89.2 mm
Shipping port: Xiamen
Warranty: 12 months
Facilitating seamless protocol translation between serial Modbus RTU/ASCII and Ethernet-based Modbus TCP networks, the Weidmuller 1504470000 (model IE-GWT-MB-2TX-1RS232/485) serves as an industrial-grade communication gateway designed for high-reliability automation environments. This device bridges legacy serial field devices with modern Ethernet control architectures, ensuring low-latency data transmission and robust network integration.
| Parameter | Value |
|---|---|
| Manufacturer | Weidmuller |
| Article Number (SKU) | 1504470000 |
| Model Designation | IE-GWT-MB-2TX-1RS232/485 |
| Ethernet Ports | 2x RJ45 (10/100BaseT(X)) |
| Serial Ports | 1x RS-232/425/485 (DB9 male or terminal block options) |
| Supply Voltage | 24 V DC (Redundant inputs) |
| Connector Type | 1 removable 7-pole terminal block |
| Operating Temperature | -40 to 75 degC |
| Storage Temperature | -40 to 85 degC |
| Ambient Relative Humidity | 5% to 95% (non-condensing) |
| Protection Class | IP30 |
| Housing Material | Plastic |
| Mounting Type | DIN rail |
| Dimensions (W x H x D) | 29 mm x 124.5 mm x 89.2 mm |
| Net Weight | 190 g |
| Shipping Weight (Calculated) | 1.0 kg |
| Interface / Terminal | Functional Assignment |
|---|---|
| 7-Pole Terminal Block | Redundant Power Input 1 (V1+, V1-), Redundant Power Input 2 (V2+, V2-), Functional Earth (FE) |
| RJ45 Ports (1 & 2) | 10/100BaseT(X) Ethernet interfaces with auto MDI/MDI-X crossover detection |
| Serial Port | RS-232 (TxD, RxD, GND) / RS-485 (Data+, Data-, GND) software-configurable pins |
The IE-GWT-MB-2TX-1RS232/485 is backward compatible with standard Modbus RTU devices operating over RS-485 2-wire networks. When replacing older single-port serial servers, the dual Ethernet ports on this model eliminate the need for an external switch in simple line topologies, reducing overall panel hardware costs.
In high-density electrical cabinets, ensure adequate clearance around the IP30 plastic housing to maintain natural convection cooling. While rated up to 75 degC, operating continuously at extreme temperatures without proper ventilation can accelerate component aging. Always verify that the Modbus TCP client timeout settings are configured to accommodate the serial bus latency, especially when polling multiple daisy-chained RTU slaves.
When wiring the RS-485 network, always install a 120-ohm termination resistor at both physical ends of the communication line to prevent signal reflections. Ensure the Functional Earth (FE) terminal on the 7-pole block is connected directly to a low-impedance ground plane to safeguard the internal transceiver circuits from transient voltage spikes and electromagnetic interference.
Disconnect all power sources before attempting installation, wiring, or removal of the gateway. Failure to de-energize the system can result in electrical shock, equipment damage, or unexpected control system behavior.
Mount the gateway onto a standard TS 35 DIN rail, ensuring the locking mechanism snaps firmly into place.
Connect the Functional Earth (FE) terminal to the local ground system to ensure proper noise immunity.
Wire the redundant 24 V DC power supplies to the removable 7-pole terminal block, verifying correct polarity before energizing.
Connect the RJ45 Ethernet cables and the serial interface lines, securing all physical connections.
การจัดส่งด่วนทั่วโลก
การคืนสินค้าและการรับประกัน
คำสั่งซื้อจะถูกดำเนินการและจัดส่งในวันจันทร์ถึงวันศุกร์ (ไม่รวมวันหยุดราชการ)
สำหรับคุณสมบัติครบถ้วน ค่าธรรมเนียมการเติมสินค้าใหม่ และรายละเอียดการคืนสินค้าระหว่างประเทศ กรุณาดูที่เว็บไซต์อย่างเป็นทางการของเรา นโยบายการคืนเงินและการคืนสินค้า .
| Country of origin |
เยอรมนี
|
This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...
This article explains how PLC systems perform core mathematical operations such as addition, subtraction, multiplication, division, modulo, and exponentiation within industrial automation. It shows...
The article explains several advanced Boolean logic functions used in PLC programming beyond basic AND, OR, and NOT operations. It covers how tools like truth tables, multiplexers, pulse generators,...
Boolean logic is the foundation of every PLC program. From simple machine controls to complex industrial automation systems, logic gates determine how controllers respond to changing inputs and...
Industrial firewalls play a critical role in OT cybersecurity, protecting PLC, DCS, and SCADA networks through segmentation, ingress/egress control, and IDS/IPS integration aligned with IEC 62443...
Modern robotic grippers are evolving beyond traditional mechanical jaws. From gecko-inspired adhesive systems and soft food-grade grippers to AI-powered warehouse tools, advanced gripping...
