B&R X20AT6402 Module d'entrée thermocouple 6 canaux système X20

Technical Description and Temperature Processing Role

The X20AT6402 (X20AT6402) is an industrial-grade temperature measurement module designed for the modular B&R X20 System automation platform. Engineered for highly precise thermal monitoring in extreme process environments—such as injection molding machinery, industrial baking ovens, chemical reactors, and metal smelting furnaces—this module provides six independent input channels specifically calibrated for thermocouple sensors. It features a high-accuracy 16-bit analog-to-digital converter (ADC) resolution that captures microvolt-level changes from thermocouple junctions and converts them into precise digital values. Integrating this hardware module into your control rack ensures stable thermal data feedback, filters out high-frequency inductive noise from heating elements, and guards against unexpected thermal runaway that causes system damage.

Signal Integrity and Electrical Infrastructure

Carrying the official B&R ID code 0x1B96, this I/O module incorporates an adjustable input filter with a software-configurable filter time constant spanning from 1 ms to 66.7 ms. This customizable filtering enables plant engineers to balance ultra-fast response times against maximum noise suppression depending on the specific dynamics of the thermal loop. The power consumption of the module is highly optimized, drawing a minimal 0.01 W from the X20 backplane bus logic lines and a maximum of 0.91 W from the internal I/O power supply line. Onboard hardware diagnostic arrays use clear LED indicators to provide real-time updates regarding individual channel I/O functions, local operating states, and overall module health status.

Performance and Sensor Specifications

Industrial Hardware FAQ

Does the X20AT6402 include internal cold junction compensation (CJC)?

Yes. To ensure accurate thermocouple temperature readings, the X20 System implements absolute compensation. The cold junction temperature reference is managed either via the terminal block sensor or a centralized compensation channel configured within B&R Automation Studio.

What happens if a thermocouple wire breaks or becomes disconnected during operation?

The module features integrated open-circuit detection logic. If a thermocouple sensor wire breaks, the channel resistance spikes to infinity, prompting the module to register an error byte on the system bus and illuminate the specific channel error LED to alert operators.

Can I mix different thermocouple types (e.g., Type J and Type K) on the same module?

Yes. Each channel parameter profile is managed independently inside B&R Automation Studio. You can configure individual channels for specific thermocouple linearization curves, provided the selected types are supported by the module firmware.

Field Commissioning and Installation Guidelines

• Extension Wire and Shielding Protocols: Thermocouple signals operate in the low-millivolt range and are highly susceptible to electromagnetic interference (EMI). Always use matching thermocouple extension or compensation wire to connect the sensor to the X20 terminal block. Run these signal wires in dedicated low-voltage wire trays, completely separated from high-power AC lines or variable frequency drive (VFD) cables.

• Filter Calibration for Noise Mitigation: In environments utilizing heavy industrial SCR power controllers for electric heating elements, set the configurable filter time toward the 66.7 ms threshold. This setting leverages the integrated low-pass digital filters to cancel out 50 Hz and 60 Hz electrical line noise, providing clean and stable temperature trends.

• Terminal Base Seating and Mechanical Security: Insert the X20AT6402 module vertically into its matching X20 base module until the mechanical locking clips latch completely. Ensure that the terminal block screws or spring clamps are firmly tightened on the raw copper conductors to eliminate contact resistance variances, which can cause reading drift or measurement errors.