CX1010-0122 | BECKHOFF | Module CPU

Description

Architected as the central processing unit for modular control environments, the Beckhoff CX1010-0122 system module integrates an Intel Pentium MMX-compatible processor running at 500 MHz to handle basic PLC and motion control execution. This module functions as the execution core within a DIN-rail mounted control cluster, offering robust performance for legacy industrial networks and machine-level control systems. Equipped with 256 MB of non-expandable DDR RAM and an active Compact Flash Type II expansion slot, the CPU delivers deterministic processing capabilities when integrated with TwinCAT software control architectures.

Features

• High-Efficiency Execution: Equipped with a 500 MHz Pentium MMX-compatible processor tailored for entry-level PLC and basic NC tasks.
• Compact Storage: Features an accessible Compact Flash Type II slot with an integrated ejector, packaged with a 128 MB CF card.
• Ethernet Connectivity: Built-in 10/100 Mbit/s RJ45 port for direct industrial networking and programming access.
• Comprehensive Diagnostics: Five local LEDs provide direct hardware feedback for power, network speed, activity, TwinCAT status, and flash card access.
• Flexible Bus Compatibility: Interfaces with K-bus, E-bus, and IP-Link I/O systems via compatible power supply modules.

Applications

• Machine tool control and small-scale automation lines.
• Building automation substations and HVAC management systems.
• Material handling, sorting systems, and conveyor line control.
• Legacy system migration and drop-in replacements for older CX series control racks.

Technical Specifications

Empirical Engineering Insights

The hardware architecture of this CPU module demands specific maintenance considerations and configuration knowledge to ensure uninterrupted operation in industrial installations.

Alternative Models & Compatibility

This CPU module belongs to the legacy CX1010 hardware line. When replacing an older generation unit, verify your TwinCAT 2 license keys, as they are hard-coded to the unique System ID of the CPU. Upgrading to the higher-performance CX1020 or CX5100 series will require physical dimension adjustments on the DIN rail and project migration within TwinCAT 2.

Application Pitfalls & Engineering Notes

The module relies on entirely passive, fanless cooling. To prevent thermal throttling under high CPU utilization, do not block the air vents on the top and bottom of the housing. Maintain a minimum vertical clearance of 30 mm inside the electrical enclosure. Additionally, ensure that only SLC-type (Single-Level Cell) Compact Flash cards are used for the OS partition, as multi-level cell cards can experience premature failure due to continuous OS read/write cycles.

Commissioning & Wiring Tips

This CPU has no direct power terminals on its faceplate. It relies entirely on a connected CX1100-xxxx series power supply module. Ensure that the PC/104 system bus connector pins are straight and clean before joining the CPU to the power supply module. Misaligned pins during assembly can cause immediate system bus failure or permanent damage to the CPU motherboard when energized.

Installation Guidelines