BECKHOFF CX5120-N031-0004 PC Embarqué Série CX

Product Overview

The CX5120-N031-0004 (CX5120N0310004) is a high-performance Embedded PC within the Beckhoff CX5100 series, specifically configured for demanding serial communication tasks. Featuring an integrated Intel Atom processor and a factory-configured RS422 interface, this unit serves as a robust controller for applications requiring high-speed, full-duplex data exchange. By combining reliable real-time control with standardized serial connectivity, the CX5120-N031-0004 acts as a critical interface for industrial motion controllers, barcode scanners, and legacy instrumentation, ensuring seamless integration into modern TwinCAT-based automation architectures and minimizing systemic integration bottlenecks.

Technical Configuration

The hardware architecture is optimized for deterministic performance in complex industrial environments. The RS422 interface is provided via a 9-pin D-sub socket, pre-configured as a full-duplex end point with integrated termination. This setup is ideal for point-to-point communication where high signal integrity is required over longer distances. The system supports full-duplex transmission (simultaneous send and receive), which enhances throughput compared to half-duplex alternatives. As part of the modular CX5100 series, this CPU allows for direct extension via local EtherCAT Terminals and Bus Terminals, enabling a scalable I/O and communication footprint that grows with machine requirements.

Technical Specifications

FAQs

Why is the RS422 interface configured as an "end point" with "termination on"?

This configuration is specifically intended for devices located at the physical terminus of an RS422 communication link. The "termination on" setting is crucial to prevent signal reflection at the end of the cable, ensuring reliable data transmission without corruption.

Can I reconfigure the RS422 interface for half-duplex operation?

The CX5120-N031-0004 is factory-optimized for full-duplex. While the physical layer is RS422-capable, modifying the communication mode usually requires specific hardware-level jumpers or software-based logic changes depending on the TwinCAT driver settings; we recommend reviewing the technical manual for specific register access.

Is this Embedded PC suitable for motion control?

Yes, the CX5100 series is designed to handle high-speed tasks, including TwinCAT motion control, thanks to the processing power of the Intel Atom core and the high-speed local EtherCAT master interface.

Engineering Guidelines and Best Practices

• Signal Integrity: Ensure the use of high-quality, shielded twisted-pair cabling for the RS422 connection. Connect the cable shield to the D-sub housing (functional earth) to minimize electromagnetic interference (EMI) in industrial electrical noise environments.
• Termination Management: Since this module is configured as an end point with termination enabled, ensure it is indeed placed at the end of your RS422 bus. Connecting multiple "termination on" devices in parallel along the same bus segment will overload the line drivers.
• Thermal Management: As an Intel Atom-based controller, the unit relies on effective heat dissipation. Maintain at least 50 mm of vertical clearance in your control panel to allow for proper airflow. Ensure the ambient temperature remains within the 0 to 55 deg C range to prevent processor thermal throttling.