ZX-LDA11 | Omron | Unités amplificatrices

Description

Integrating high-speed resolution and flexible configuration into industrial measurement networks, the ZX-LDA11 functions as a high-performance NPN amplifier unit within the Omron ZX series platform. This sensor amplifier provides the signal processing required for displacement and measurement applications, executing rapid sampling and linear signal conversion from connected sensor heads. It bridges the raw physical measurements from optical and inductive heads to standard control systems like PLCs and dedicated positioning modules.

Built for precise industrial inspection environments, the device features robust analog outputs—both current and voltage—alongside configurable digital averaging to optimize measurement stability under varying conditions. The module is fully compatible with both reflective and through-beam ZX-series sensor heads, enabling precision positioning, thickness measurement, and surface profile analysis across automated production lines.

Features

• High-Speed Response: Features a rapid sampling period of 150 microseconds for dynamic real-time tracking.
• Dual Linear Outputs: Supports simultaneous current (4 to 20 mA) and voltage (±4 V, ±5 V, or 1 to 5 V) outputs for flexible system integration.
• Configurable Averaging: Integrated digital filter supports average count settings from 1 to 4,096 cycles to suppress environmental noise.
• NPN Output Logic: Engineered for seamless interface with standard NPN-compatible industrial input modules and controllers.
• Robust Build: Constructed with a durable polybutylene terephthalate (PBT) case and a polycarbonate cover to withstand demanding industrial environments.

Applications

• Precision electronic component positioning and height measurement.
• Sheet thickness monitoring in metalworking and plastics extrusion.
• Surface flatness and profile inspections in automotive assembly.
• High-speed packaging and sorting alignment control.

Technical Specifications

Installation Guidelines

• Mounting: Mount on a standard 35mm DIN rail within a clean, vibration-free electrical enclosure.
• Wiring Isolation: Route the 2m pre-wired cable away from high-voltage lines, power cables, and motor drive leads to prevent electromagnetic interference.
• Grounding: Ensure the mounting rail and the sensor head shield are securely grounded to a single point to ensure measurement accuracy.
• Environmental Controls: Avoid installation in environments with direct exposure to water, oil, or corrosive gases, and ensure ambient temperatures remain between 0 and 50 degC.