NX-ECC202 | Omron | Unité coupleur EtherCAT® série NX

Il ne reste que 4 article(s) en stock

Fabricant : Omron
N° de produit : NX-ECC202
Pays d'origine :Japon
Type de produit : Unité coupleur EtherCAT® série NX
Paiement : Virement bancaire, Western Union
Poids : 2000g
Dimensions : 7.1 cm x 4.6 cm x 10 cm
Port d'expédition : Xiamen
Garantie : 12 mois

Description

The NX-ECC202 is an EtherCAT Coupler Unit from the NX-series, designed to act as the primary interface between an EtherCAT network master and the distributed NX-series I/O modules. This unit facilitates high-speed, deterministic data exchange, supporting up to 63 connectable NX Units on a single slave node. Utilizing the 100BASE-TX (IEEE 802.3) physical layer with a 100 Mbps baud rate, the NX-ECC202 ensures seamless synchronization and communication within complex machine control architectures. The device is intended for panel mounting and requires integration into an EtherCAT network managed by a compatible master controller.

Features

Protocol: EtherCAT (100 Mbps baseband modulation)
Capacity: Supports up to 63 NX-series I/O modules
Physical Layer: 100BASE-TX (IEEE 802.3)
Mounting: Panel-mounted enclosure
Grounding: Requires a ground resistance of 100 Ohm or less

Applications

Distributed I/O systems in industrial automation
High-speed synchronized machine control
Modular PLC architectures
Factory automation network integration

Technical Specifications

Parameter	Specification
Manufacturer	Omron
Model	NX-ECC202
Product Type	EtherCAT Coupler Unit
Max Connectable Units	63
Communications Protocol	EtherCAT
Baud Rate	100 Mbps
Physical Layer	100BASE-TX (IEEE 802.3)
Enclosure	Panel Mounted
Grounding	100 Ohm or less
Dimensions	7.1 cm x 4.6 cm x 10 cm
Shipping Weight	2 kg

Installation Guidelines

Mounting: Mount the unit inside an industrial control panel. Ensure adequate spacing around the device for ventilation.
Grounding: To ensure signal integrity and electrical safety, connect the functional ground terminal to a common ground point with a resistance of 100 Ohm or less.
Network Wiring: Use shielded twisted-pair (STP) Category 5e or higher cables for 100BASE-TX EtherCAT connections to mitigate electromagnetic interference.
Topology: The network topology must comply with the configuration and capabilities of the designated EtherCAT master controller.

Key Features:

#Communication Coupler Units #Omron NX-series

What is the maximum number of I/O modules supported by the NX-ECC202?

The NX-ECC202 can support a maximum of 63 NX-series I/O units connected to a single coupler.

What physical layer standard does this coupler use?

This unit utilizes the 100BASE-TX (IEEE 802.3) physical layer standard.

What is the required grounding resistance for this unit?

The device must be grounded to a resistance of 100 Ohm or less to maintain operational safety and noise immunity.

Expédition express mondiale

Livraison standard : 4 à 6 jours ouvrables via DHL, FedEx et UPS.
Expédition express : Expédition le jour même pour les commandes en stock passées avant 14h00 (GMT+8).
Couverture mondiale : Service dans plus de 150 pays, avec livraison rapide en Arabie Saoudite et aux Émirats arabes unis.

Retours et garantie

Garantie de 30 jours : Retours acceptés pour les produits en stock dans leur emballage d’origine scellé en usine.
Garantie de 12 mois : Chaque composant industriel est couvert par notre garantie technique professionnelle.

Les commandes sont traitées et livrées du lundi au vendredi (hors jours fériés).

Pour connaître les conditions d’éligibilité complètes, les frais de restockage et les détails des retours internationaux, veuillez consulter notre site officiel Politique de remboursement et de retour .