Siemens 6AV7240-6BD17-0AQ3 SIMATIC IPC 477D Panel PC

Il ne reste que 4 article(s) en stock

Fabricant : Siemens
N° de produit : 6AV7240-6BD17-0AQ3
Pays d'origine :Allemagne
Type de produit : PC industriel à écran tactile
Code-barres : 85371098
Paiement : Virement bancaire, Western Union
Poids : 5g
Dimensions : 48 cm x 40 cm x 20 cm (Estimate)
Port d'expédition : Xiamen
Garantie : 12 mois

Description

This is a Siemens SIMATIC IPC 477D Panel PC, model 6AV7240-6BD17-0AQ3, an integrated human-machine interface (HMI) solution for demanding industrial environments. It features a 15-inch touch display and is powered by an Intel Core i7-3517UE processor with 8 GB of RAM. This unit is configured without internal mass storage, allowing for flexible drive selection and replacement. It comes pre-loaded with a comprehensive software package including Windows 7 Ultimate, WinAC RTX F 2010 SP2, and WinCC RT Advanced licenses, making it suitable for complex visualization and real-time control tasks.

Features

15-inch resistive touch display for operator interaction.
Powered by an Intel Core i7-3517UE dual-core processor.
Equipped with 8 GB of system memory.
Dual Gigabit Ethernet ports for network connectivity (IE/PN).
Multiple USB ports: four on the rear and one on the front for peripheral access.
Includes one RS-232 serial port and one PCIe expansion slot.
Pre-installed with Windows 7 Ultimate (64-bit) operating system.
Bundled with WinAC RTX F 2010 SP2 and WinCC RT Advanced V13/V15 software licenses.
Powered by a 110/230V AC industrial power supply with NAMUR compliance.

Applications

Process visualization and control (SCADA/HMI)
Machine-level data acquisition and logging
Manufacturing Execution Systems (MES) terminals
Industrial automation control panels
PC-based automation with software PLC requirements

Technical Specifications

Specification	Value
Manufacturer	Siemens
Product Series	SIMATIC IPC 477D
Model Number	6AV7240-6BD17-0AQ3
Display	15-inch Touch Display
Processor	Intel Core i7-3517UE
Memory (RAM)	8 GB
Internal Storage	Not included (replaceable without drive)
Ethernet Ports	2 x Gigabit Ethernet (10/100/1000 Mbps), IE/PN compatible
USB Ports	4 x Rear, 1 x Front
Serial Port	1 x RS-232
Expansion Slot	1 x PCIe
Operating System	Windows 7 Ultimate, 64-bit
Pre-installed Software	WinAC RTX F 2010 SP2; WinCC RT Advanced V13 SP1 512PT (incl. Logging and Recipes); WinCC RT Advanced V15 License Package
Power Supply	110/230V AC Industrial Power Supply with NAMUR
Included Accessories	Power supply cable for USA
Product Lifecycle Status	Phase-Out
Shipping Weight	5.00 kg
Commodity Code	85371098
Country of Origin	Germany (Estimate)
Package Dimensions (Calculated)	48 cm x 40 cm x 20 cm (Estimate)

Installation Guidelines

CRITICAL WARNING: Hazardous voltages are present. Installation must be performed by qualified personnel only. Failure to de-energize equipment and follow Lockout/Tagout (LOTO) procedures before installation can result in severe injury or death. Use appropriate Personal Protective Equipment (PPE).

1
Site Preparation: Ensure the panel cutout dimensions match the IPC 477D specifications. The mounting surface must be clean, flat, and capable of supporting the unit's weight. Maintain required clearance for ventilation and cable access.
2
Mounting: Insert the Panel PC into the prepared cutout from the front. Secure the unit from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a cross-pattern to ensure a uniform seal against the panel gasket. Do not overtighten.
3
Grounding: Connect the protective earth (PE) terminal on the IPC chassis to the main control panel's protective earth bus using a low-impedance conductor. A proper ground connection is critical for safety and noise immunity.
4
Power Connection: Connect the provided AC power cable to the unit's power supply input. Ensure the source voltage (110V or 230V AC) matches the supply rating. Route the power cable separately from signal and communication cables to minimize interference.
5
I/O and Network Cabling: Connect Ethernet, USB, and serial cables as required. Use shielded cables for all communication links. Ensure all connectors are fully seated and secured. Power on the unit only after all connections are made and verified.

Key Features:

#Industrial Panel PC #SIMATIC IPC

What processor is installed in the 6AV7240-6BD17-0AQ3?

This Panel PC is equipped with an Intel Core i7-3517UE processor.

Does this unit come with a hard drive or SSD?

No, this specific model is supplied without any internal mass storage, allowing for user-defined drive installation.

What operating system is pre-loaded on this IPC?

The unit comes with Windows 7 Ultimate (64-bit) pre-installed.

What is the required input power for this device?

It uses a 110/230V AC industrial power supply. A power cable for USA outlets is included.

What software licenses are included with this Panel PC?

It includes licenses for WinAC RTX F 2010 SP2, WinCC RT Advanced V13 SP1 (512 PowerTags), and a WinCC RT Advanced V15 license package.

Expédition express mondiale

Livraison standard : 4 à 6 jours ouvrables via DHL, FedEx et UPS.
Expédition express : Expédition le jour même pour les commandes en stock passées avant 14h00 (GMT+8).
Couverture mondiale : Service dans plus de 150 pays, avec livraison rapide en Arabie Saoudite et aux Émirats arabes unis.

Retours et garantie

Garantie de 30 jours : Retours acceptés pour les produits en stock dans leur emballage d’origine scellé en usine.
Garantie de 12 mois : Chaque composant industriel est couvert par notre garantie technique professionnelle.

Les commandes sont traitées et livrées du lundi au vendredi (hors jours fériés).

Pour connaître les conditions d’éligibilité complètes, les frais de restockage et les détails des retours internationaux, veuillez consulter notre site officiel Politique de remboursement et de retour .