Produsen: Mitsubishi Electric
Nomor Produk: FR-A840-5.5K-1
Negara asal:Amerika Serikat
Jenis Produk: Variable Frequency Drives
Pembayaran: T/T, Western Union
Berat: 8000g
Dimensi: 260 mm x 220 mm x 170 mm
Pelabuhan pengiriman: Xiamen
Garansi: 12 bulan
Managing heavy-duty motor operations requires precise speed regulation and high torque response. The Mitsubishi Electric FR-A840-5.5K-1 variable frequency drive delivers exceptional vector control and real-time sensorless control for three-phase induction and permanent magnet motors. This inverter is engineered for highly demanding automation layouts, providing reliable performance, structural durability, and multi-protocol network capabilities within a compact chassis.
| Manufacturer | Mitsubishi Electric |
| Model Number | FR-A840-5.5K-1 |
| Applicable Motor Capacity | 5.5 kW |
| Input Voltage Class | Three-phase 400 V AC (380 to 500 V at 50/60 Hz) |
| Output Rated Voltage | Three-phase 380 to 500 V AC |
| Output Rated Current | 12 A |
| Output Capacity | 9.1 kVA |
| Serial Communications | RS-232, RS-422, RS-485 |
| Enclosure Protection Class | IP20 |
| Standards | CE, UL, cUL |
| Dimensions (H x W x D) | 260 mm x 220 mm x 170 mm |
| Shipping Weight (Calculated) | 8.0 kg |
| Terminal / Port | Function / Circuit Assignment |
|---|---|
| R/L1, S/L2, T/L3 | Three-phase AC power input |
| U, V, W | Three-phase AC output to induction/PM motor |
| P/+, PR | External brake resistor connection |
| PU Connector | RJ-45 port for parameter unit (FR-PU07) or RS-485 connection |
| SD, PC, 5 | Control circuit common and power supply lines |
The FR-A840-5.5K-1 belongs to the flagship A800 inverter range, succeeding the legacy FR-A740 series. While physical footprints are largely compatible, wiring terminal alignments differ slightly. Parameter migration from older installations is streamlined via the FR Configurator2 software, allowing automatic conversion of legacy registers to the newer, high-resolution parameters of the current platform.
When mounting this drive within closed electrical panels, adequate ventilation is essential. Under continuous 12 A load conditions, heat dissipation can lead to thermal tripping if localized temperatures rise above 50 degC. Ensure a minimum clearance of 50 mm on both sides and 100 mm top and bottom. Avoid routing high-voltage motor output cables parallel to low-voltage sensor cables to prevent electromagnetic coupling.
When using dynamic braking configurations, ensure that the parameter settings for brake deceleration duty cycles match the thermal ratings of the external resistors. Always connect a dedicated ground wire directly from the drive's ground terminal to the main system ground bus to mitigate leakage currents and transient voltage spikes.
CRITICAL WARNING:
De-energize all primary and secondary power sources prior to installation. Internal main circuit capacitors hold highly lethal residual voltage. Wait a minimum of 10 minutes after disconnecting power, and verify that the charge LED indicator has extinguished before touching any terminals or wiring structures.
Mount the drive vertically to flat, solid surfaces in a well-ventilated enclosure.
Connect three-phase input power lines to R/L1, S/L2, and T/L3 terminals. Do not apply input power to output terminals.
Wire motor leads to U, V, and W terminals using shielded, low-impedance cabling.
Secure all cover plates, apply power, and initiate the motor parameter auto-tuning function through the keypad.
Pengiriman Ekspres Global
Pengembalian & Garansi
Pesanan diproses dan dikirimkan Senin-Jumat (tidak termasuk hari libur nasional).
Untuk kelayakan penuh, biaya pengisian ulang, dan detail pengembalian internasional, silakan lihat resmi kami Kebijakan Pengembalian & Pengembalian Dana .
| Country of origin |
Amerika Serikat
|
Artikel ini menjelaskan bagaimana aktuator listrik terintegrasi, seperti seri e-Actuator dari SMC, mengubah kontrol gerak industri dengan menggantikan sistem pneumatik dan hidrolik tradisional....
Artikel ini menjelaskan bagaimana sistem PLC melakukan operasi matematika inti seperti penjumlahan, pengurangan, perkalian, pembagian, modulo, dan perpangkatan dalam otomasi industri. Artikel ini...
Artikel ini menjelaskan beberapa fungsi logika Boolean lanjutan yang digunakan dalam pemrograman PLC selain operasi dasar AND, OR, dan NOT. Artikel ini membahas bagaimana alat seperti tabel...
Logika Boolean adalah dasar dari setiap program PLC. Dari kontrol mesin sederhana hingga sistem otomasi industri yang kompleks, gerbang logika menentukan bagaimana pengendali merespons perubahan...
Firewall industri memainkan peran penting dalam keamanan siber OT, melindungi jaringan PLC, DCS, dan SCADA melalui segmentasi, kontrol masuk/keluar, dan integrasi IDS/IPS yang sesuai dengan prinsip...
Gripper robot modern berkembang melampaui rahang mekanis tradisional. Mulai dari sistem adhesif yang terinspirasi oleh cicak dan gripper lembut yang aman untuk makanan hingga alat gudang bertenaga...
