330910-16-23-10-02-00: 3300 NSv proximity probe, M10x1 metric thread with integrated stainless steel armor, Option 16 specifying 160 mm unthreaded length and Option 23 specifying 230 mm overall case length. This non-contact eddy-current displacement sensor is designed for tight-clearance situations with reduced target areas where standard probes cannot be installed.
Unlike standard 8 mm probe systems, this 3300 NSv configuration utilizes a narrower physical profile to measure shaft vibration, axial position, and dynamic speed on high-speed machinery. It operates with a 3300 NSv Proximitor Sensor and standard extension cable. This specific model features a 1.0 m total length with a miniature coaxial ClickLoc connector, packaged without hazardous area approvals under Option 00.
Used for shaft vibration, shaft position, and speed measurements on industrial machinery with tight clearance or limited target geometry. Typical installations include small-bore bearings, high-speed turbomachinery, aeroderivative gas turbines, centrifugal compressors, and small pumps.
| Option Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330910-16-23-10-02-00 | 3300 NSv proximity probe, M10x1 thread, with stainless steel armor |
| A - Unthreaded Length | 16 | 160 mm unthreaded length (ordered in increments of 10 mm) |
| B - Overall Case Length | 23 | 230 mm overall case length (ordered in increments of 10 mm) |
| C - Total Length | 10 | 1.0 meter (3.3 feet / 39 inches) |
| D - Connector and Cable Type | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval | 00 | Not required |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Model / Part Number | 330910-16-23-10-02-00 |
| Thread Type | M10x1 metric thread |
| Armor Protection | Stainless steel armor |
| Linear Range | 1.5 mm (60 mils) starting at 0.25 mm (10 mils) from target |
| Recommended Gap Setting | 1.0 mm (40 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +12.5% / -20% |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.06 mm (+/-2.3 mils) |
| Frequency Response | 0 to 10 kHz (+0, -3 dB) |
| Probe DC Resistance | 4.2 +/- 0.5 ohms (center conductor to outer conductor) |
| Operating and Storage Temperature (Probe) | -52 degC to +177 degC (-62 degF to +351 degF) |
| Relative Humidity | 100% condensing, non-submersible with protected connectors |
| Probe Case Torque Limit | 11.3 N m (100 in-lb) recommended, 33.9 N m (300 in-lb) maximum |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Target Material Calibration | AISI 4140 steel (standard calibration) |
To avoid binding during installation, the maximum length of thread engagement for M10x1 probes is 15 mm. The probe case torque must not exceed the maximum rated limit of 33.9 N m (300 in-lb) to prevent mechanical damage. Ensure that the sum of probe length and extension cable length equals the Proximitor Sensor system calibration length (5.0 m or 7.0 m). Connector protectors or self-fusing silicone tape are recommended for all cable connections to prevent liquid contamination.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330910-16-23-10-02-00
Country of origin:United States
Product Type: 3300 NSv Proximity Probes
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 120g
Dimensions: 45 mm x 90 mm x 90 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330910-16-23-10-02-00: 3300 NSv proximity probe, M10x1 metric thread with integrated stainless steel armor, Option 16 specifying 160 mm unthreaded length and Option 23 specifying 230 mm overall case length. This non-contact eddy-current displacement sensor is designed for tight-clearance situations with reduced target areas where standard probes cannot be installed.
Unlike standard 8 mm probe systems, this 3300 NSv configuration utilizes a narrower physical profile to measure shaft vibration, axial position, and dynamic speed on high-speed machinery. It operates with a 3300 NSv Proximitor Sensor and standard extension cable. This specific model features a 1.0 m total length with a miniature coaxial ClickLoc connector, packaged without hazardous area approvals under Option 00.
Used for shaft vibration, shaft position, and speed measurements on industrial machinery with tight clearance or limited target geometry. Typical installations include small-bore bearings, high-speed turbomachinery, aeroderivative gas turbines, centrifugal compressors, and small pumps.
| Option Segment | Code on This SKU | Description |
|---|---|---|
| Orderable Part Number | 330910-16-23-10-02-00 | 3300 NSv proximity probe, M10x1 thread, with stainless steel armor |
| A - Unthreaded Length | 16 | 160 mm unthreaded length (ordered in increments of 10 mm) |
| B - Overall Case Length | 23 | 230 mm overall case length (ordered in increments of 10 mm) |
| C - Total Length | 10 | 1.0 meter (3.3 feet / 39 inches) |
| D - Connector and Cable Type | 02 | Miniature coaxial ClickLoc connector, standard cable |
| E - Agency Approval | 00 | Not required |
| Parameter | Specification Value |
|---|---|
| Manufacturer | Bently Nevada |
| Model / Part Number | 330910-16-23-10-02-00 |
| Thread Type | M10x1 metric thread |
| Armor Protection | Stainless steel armor |
| Linear Range | 1.5 mm (60 mils) starting at 0.25 mm (10 mils) from target |
| Recommended Gap Setting | 1.0 mm (40 mils) |
| Incremental Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) +12.5% / -20% |
| Deviation from Best Fit Straight Line (DSL) | Less than +/-0.06 mm (+/-2.3 mils) |
| Frequency Response | 0 to 10 kHz (+0, -3 dB) |
| Probe DC Resistance | 4.2 +/- 0.5 ohms (center conductor to outer conductor) |
| Operating and Storage Temperature (Probe) | -52 degC to +177 degC (-62 degF to +351 degF) |
| Relative Humidity | 100% condensing, non-submersible with protected connectors |
| Probe Case Torque Limit | 11.3 N m (100 in-lb) recommended, 33.9 N m (300 in-lb) maximum |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Target Material Calibration | AISI 4140 steel (standard calibration) |
To avoid binding during installation, the maximum length of thread engagement for M10x1 probes is 15 mm. The probe case torque must not exceed the maximum rated limit of 33.9 N m (300 in-lb) to prevent mechanical damage. Ensure that the sum of probe length and extension cable length equals the Proximitor Sensor system calibration length (5.0 m or 7.0 m). Connector protectors or self-fusing silicone tape are recommended for all cable connections to prevent liquid contamination.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
A practical engineering guide to PLC CPU operation, from deterministic scan cycles and I/O image tables to memory, communications, diagnostics, redundancy, processor sizing, and reliable system...
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implementa un circuito luminoso XOR con 3 interruttori SPST in LogixPro o RSLogix 500 utilizzando un bit di relè interno. Include tabelle della verità, equazioni booleane e verifica.
Integra Allen-Bradley CompactLogix, Caterpillar ATS e generatori nel DCS DeltaV tramite Modbus RTU. Include i gateway ProSoft MVI69-MCM e Miille DIN266.
L’istruzione ONS si attiva, ma la bobina OTE non rimane mai eccitata in Studio 5000 perché il one-shot è vero solo per una scansione. Usa OTL/OTU oppure una logica di autoritenuta.
Configura i servoazionamenti Allen-Bradley Kinetix 5500 su EtherNet/IP. Include CIP Sync, la temporizzazione IEEE 1588 V2, la selezione degli switch Stratix, la topologia DLR e l’HMI.
