Designed specifically for energy-efficient HVAC and pumping systems, the VFD450CP43S-21 is a high-performance variable frequency drive belonging to the premium Delta Electronics CP2000 series. This unit delivers precise sensorless vector control optimized for variable torque loads such as industrial fans, blowers, and centrifugal pumps. By dynamic adjustment of motor speed relative to real-time load demands, it significantly reduces energy consumption and mechanical wear across industrial processes.
The drive features an integrated PLC capability, allowing engineers to program custom logic sequences directly on the device without requiring external controllers. It supports multi-pump control algorithms out of the box, facilitating automated circulation, redundancy, and pressure control schemes. Housed in a durable wall-mount enclosure, the drive maintains steady performance under challenging operating conditions while offering straightforward integration into modern industrial networks.
| Delta Electronics |
| VFD450CP43S-21 |
| CP2000 |
| 60 HP (45 kW) |
| 73 Amps |
| 460V 3-Phase |
| Wall Mount |
| IP20 |
| NEMA 1 |
| -10 to 50 degC (without derating) |
| 11.02 in x 24.19 in x 10.04 in |
| 40 Kg |
For optimal reliability and safety, ensure the VFD450CP43S-21 is installed vertically on a non-combustible, flat vertical wall. Maintain a minimum clearance of 50 mm on both sides and 120 mm above and below the drive to ensure unobstructed airflow for the cooling fans. Since this module carries an IP20/NEMA 1 rating, it must be installed in a clean, dry, and dust-free environment protected from direct sunlight, corrosive gases, and moisture condensation.
Always connect the grounding terminal to a dedicated, low-impedance ground point (less than 10 ohms for 400V class systems) to minimize electromagnetic interference (EMI). Shielded motor cables are highly recommended to prevent cross-talk and RF noise emission into adjacent control instrumentation.
Global Express Shipping
Returns & Warranty
Manufacturer: Delta Electronics
Product No.: VFD450CP43S-21
Country of origin:United States
Product Type: Variable Frequency Drives
Payment: T/T, Western Union
Weight: 40000g
Dimensions: 11.02 in x 24.19 in x 10.04 in
Shipping port: Xiamen
Warranty: 12 months
Designed specifically for energy-efficient HVAC and pumping systems, the VFD450CP43S-21 is a high-performance variable frequency drive belonging to the premium Delta Electronics CP2000 series. This unit delivers precise sensorless vector control optimized for variable torque loads such as industrial fans, blowers, and centrifugal pumps. By dynamic adjustment of motor speed relative to real-time load demands, it significantly reduces energy consumption and mechanical wear across industrial processes.
The drive features an integrated PLC capability, allowing engineers to program custom logic sequences directly on the device without requiring external controllers. It supports multi-pump control algorithms out of the box, facilitating automated circulation, redundancy, and pressure control schemes. Housed in a durable wall-mount enclosure, the drive maintains steady performance under challenging operating conditions while offering straightforward integration into modern industrial networks.
| Delta Electronics |
| VFD450CP43S-21 |
| CP2000 |
| 60 HP (45 kW) |
| 73 Amps |
| 460V 3-Phase |
| Wall Mount |
| IP20 |
| NEMA 1 |
| -10 to 50 degC (without derating) |
| 11.02 in x 24.19 in x 10.04 in |
| 40 Kg |
For optimal reliability and safety, ensure the VFD450CP43S-21 is installed vertically on a non-combustible, flat vertical wall. Maintain a minimum clearance of 50 mm on both sides and 120 mm above and below the drive to ensure unobstructed airflow for the cooling fans. Since this module carries an IP20/NEMA 1 rating, it must be installed in a clean, dry, and dust-free environment protected from direct sunlight, corrosive gases, and moisture condensation.
Always connect the grounding terminal to a dedicated, low-impedance ground point (less than 10 ohms for 400V class systems) to minimize electromagnetic interference (EMI). Shielded motor cables are highly recommended to prevent cross-talk and RF noise emission into adjacent control instrumentation.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Replacing a 1756-L73 does not automatically mean upgrading its firmware. This guide compares v19.013, v21.011 and v31.011, focusing on project compatibility, HMI communications, legacy networks and...
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
