Description

The Siemens 6AV7240-0DC04-0HE0 is a SIMATIC IPC 477D industrial panel PC featuring a 19-inch touch display. This robust unit is equipped with a Celeron U827E processor, 4 GB of RAM, and an 80 GB SSD (MLC) for reliable operation in demanding industrial environments. It provides comprehensive connectivity with multiple USB ports (4 rear, 1 front), 10/100/1000 Ethernet, and two Gbit Ethernet interfaces (IE/PN). An RS-232 serial interface is also included, with no PCIe slots. The system is designed to run Windows Embedded Standard 7 (32-bit), which is replaceable without requiring a drive. It comes pre-loaded with WinCC RT Advanced V13 SP1 (2048 PT, including logging and recipes) and a WinCC RT Advanced V15 license package, powered by a 24 V DC industrial power supply.

Features

• 19-inch Touch Display
• Celeron U827E Processor
• 4 GB RAM
• 80 GB SSD (MLC)
• 4x USB (rear) + 1x USB (front)
• 1x 10/100/1000 Ethernet port
• 2x Gbit Ethernet (IE/PN) ports
• 1x RS-232 Serial Interface
• 24 V DC Industrial Power Supply
• Pre-installed with WinCC RT Advanced V13 SP1 (2048 PT, incl. logging and recipes)
• Includes WinCC RT Advanced V15 License Package
• Windows Embedded Standard 7, 32-bit (replaceable without drive)

Applications

• Industrial Human Machine Interface (HMI) systems
• Process visualization and control
• Data acquisition and logging
• Manufacturing automation
• Machine operation and monitoring
• Embedded control systems

Technical Specifications

Installation Guidelines

1. Power De-energization: Before commencing any installation or wiring, ensure that all power to the system and associated equipment is de-energized and locked out according to safety protocols.
2. Mounting: Mount the panel PC securely into a standard industrial panel cutout. Ensure adequate clearance for ventilation around the unit to prevent overheating.
3. Power Connection: Connect the 24 V DC industrial power supply to the designated terminals, observing correct polarity. Use appropriately sized and shielded cables to minimize electrical noise.
4. Grounding: Establish a proper protective earth (PE) connection to the designated grounding terminal on the device. Ensure low-impedance grounding for safety and EMC compliance.
5. Ethernet Connections: Connect industrial Ethernet cables to the Gbit Ethernet (IE/PN) ports for network integration. Use shielded cables (e.g., Cat5e/Cat6) in industrial environments.
6. USB and Serial Connections: Connect USB devices and RS-232 serial devices as required for peripherals or communication with other equipment.
7. Cable Routing: Route power, signal, and communication cables separately where possible to prevent interference. Secure all cables to prevent strain and accidental disconnection.
8. Environmental Considerations: Ensure the installation location meets the specified environmental conditions (temperature, humidity, vibration) for the IPC to ensure optimal performance and longevity.
9. Power-Up: After all connections are verified, re-energize the system and observe for proper boot-up and operation.