Description

This is a Siemens 6AV7240-3DC00-0PA0 SIMATIC IPC 477D, an industrial-grade panel PC designed for demanding automation environments. It features a 19-inch touch display, an Intel Core i3-3217UE processor, 4 GB of RAM, and a 240 GB MLC solid-state drive for reliable performance. Connectivity is provided through dual Gigabit Ethernet ports, five USB ports, and an RS-232 serial interface. This unit is configured to operate on a 24 V DC industrial power supply and is delivered without a pre-installed operating system or any SIMATIC software, allowing for custom system integration.

Features

• 19-inch resistive touch display for operator interaction.
• Powered by an Intel Core i3-3217UE processor.
• Equipped with 4 GB of system memory.
• Includes a 240 GB MLC Solid-State Drive (SSD) for storage.
• Features dual Gigabit Ethernet (IE/PN) interfaces for network connectivity.
• Provides five total USB ports (4 rear, 1 front) for peripherals.
• Includes one RS-232 serial communication port.
• Designed for a 24 V DC industrial power supply.
• Supplied without a pre-installed operating system or SIMATIC software.

Applications

• Human-Machine Interface (HMI) visualization tasks.
• SCADA client stations in process control systems.
• Data acquisition, logging, and analysis.
• Control room and machine-level operator panels.
• Manufacturing Execution System (MES) terminals.

Technical Specifications

Installation Guidelines

1. 1 Verify the panel cutout dimensions against the device specifications. Ensure adequate clearance around the unit for ventilation and cable routing, especially at the rear.
2. 2 Insert the Panel PC into the prepared cutout. Secure it firmly using all provided mounting clips, tightening them sequentially to ensure an even, sealed fit against the panel surface.
3. 3 Connect a stable 24 V DC power source to the designated power input terminals. Strictly observe the correct polarity (+/-) to prevent damage to the internal electronics.
4. 4 Establish a reliable protective earth (PE) connection from the system ground to the designated grounding point on the IPC chassis. This is critical for safety and noise immunity.
5. 5 Connect Ethernet, USB, and serial communication cables as required by the application. Ensure all connectors are fully seated and provide strain relief for cables to prevent accidental disconnection.
6. 6 After all connections are securely made and verified, remove the lockout/tagout devices and re-energize the main power supply circuit to commission the Panel PC.