Description

This is a Siemens 6AV7612-0AE10-0AJ0 SIMATIC Panel PC 670, an integrated human-machine interface (HMI) designed for industrial control and visualization applications. This standard configuration features a 12-inch TFT touchscreen display, an Intel Celeron 300 MHz CPU, 64 MB of RAM, and a 40 GB hard drive. It operates on a 24 V DC power supply and comes pre-installed with the Windows NT 4.0 English operating system. As an obsolete model, this unit serves as a critical replacement part for maintaining the operational integrity of legacy automation systems.

Features

• ■Integrated 12-inch TFT color touchscreen display
• ■Powered by an Intel Celeron 300 MHz processor
• ■Equipped with 64 MB of system RAM
• ■Includes a 40 GB hard drive for OS and application storage
• ■Designed for a 24 V DC industrial power environment
• ■Pre-loaded with Windows NT 4.0 (English)

Applications

• ■Machine-level operator control and process visualization
• ■Supervisory control for small-scale automation cells
• ■Data acquisition and logging systems
• ■Direct replacement in existing manufacturing and processing lines

Technical Specifications

Installation Guidelines

1. 1 Ensure the control cabinet is de-energized and verify zero voltage before beginning work.
2. 2 Verify the panel cutout dimensions match the PC 670 chassis requirements. Carefully remove the old unit if performing a replacement.
3. 3 Insert the Panel PC into the cutout and secure it evenly using all provided mounting clamps to ensure a proper seal and mechanical stability. Do not overtighten.
4. 4 Connect the 24 V DC power supply. Double-check for correct polarity (+/-) at the terminal block to prevent permanent damage to the unit.
5. 5 Connect the chassis to the cabinet's protective earth (PE) ground using the designated grounding terminal. A low-impedance ground connection is essential for safety and noise immunity.
6. 6 Reconnect all communication and peripheral cables (e.g., Ethernet, serial, USB) as required by the application.
7. 7 After verifying all connections, remove the lockout/tagout and re-energize the cabinet. Power on the Panel PC and confirm that the operating system boots correctly.