Description

This device is a Siemens 6AV7613-0AB32-0CF0 panel PC from the SIMATIC Panel PC 670 series. It is configured with a 12-inch TFT display, a Pentium III 500 MHz CPU, 256 MB of RAM, and a 20 GB hard drive with an integrated CD-ROM. This unit is designed for industrial human-machine interface (HMI) and control applications, operating on a 115-230 V AC power supply. It comes pre-installed with the Windows 98 operating system in English and includes a European mains cable. Please note that this product is considered obsolete, making it suitable for legacy system maintenance and spares.

Features

• Integrated 12-inch TFT color display for visualization.
• Powered by a Pentium III 500 MHz processor.
• Equipped with 256 MB of system RAM.
• Includes a 20 GB hard drive for local data storage.
• Features an integrated CD-ROM drive.
• Pre-loaded with Microsoft Windows 98 (English version).
• Flexible power input range of 115-230 V AC.

Applications

• Legacy HMI (Human Machine Interface) replacement.
• Supervisory Control and Data Acquisition (SCADA) nodes.
• Machine-level data logging and visualization.
• Process control front-end for manufacturing lines.
• Industrial automation control panels.

Technical Specifications

Installation Guidelines

1. 1
   Panel Cutout and Mounting: Prepare the control cabinet panel cutout according to the device's mechanical drawings. Ensure the mounting surface is clean, flat, and rigid. Insert the Panel PC into the cutout and secure it evenly using all provided mounting clamps to maintain the specified ingress protection rating.
2. 2
   Protective Earth (PE) Connection: Connect the chassis to the control cabinet's protective earth system using a low-impedance conductor. This connection is critical for operator safety and electromagnetic compatibility (EMC). Use the designated grounding terminal on the device.
3. 3
   Power Supply Connection: Connect the AC mains power using the provided cable to a stable, correctly rated power source (115-230 V AC). Ensure the source is protected by an appropriate circuit breaker or fuse. Route power cables separately from signal and communication lines to minimize interference.
4. 4
   Peripheral and Network Connections: Connect all required peripherals (e.g., keyboard, mouse) and network cables. Use shielded cables for all data communication lines and ensure shields are properly terminated at one end to the cabinet ground to prevent ground loops.
5. 5
   System Power-Up: After verifying all connections are secure and correct, remove LOTO devices and re-energize the main power source. Power on the Panel PC and verify that the operating system boots correctly and all connected devices are recognized.