Description

This is a SIMATIC Panel PC 670, model 6AV7613-0AE12-0AH0, manufactured by Siemens. It is an industrial human-machine interface (HMI) designed for machine-level visualization and control tasks. This standard configuration features a 12-inch TFT display, a 500 MHz Pentium III CPU, 64 MB of RAM, and a 40 GB hard drive. The unit operates on a 24 V DC power supply and comes pre-installed with the Windows NT 4.0 operating system in German. Please note that this product line is considered obsolete by the manufacturer.

Features

• 12-inch color TFT display for process visualization.
• Powered by a 500 MHz Intel Pentium III processor.
• Equipped with 64 MB of system RAM.
• Includes a 40 GB internal hard drive for data and application storage.
• Operates on a nominal 24 V DC industrial power source.
• Pre-loaded with Windows NT 4.0 operating system (German language version).

Applications

• Machine control and operation panels
• Process visualization and SCADA clients
• Industrial data acquisition and logging
• Factory automation control rooms
• Manufacturing execution systems (MES) terminals

Technical Specifications

Installation Guidelines

1. 1 Prepare Enclosure: Ensure the target panel or enclosure is properly prepared with the correct cutout dimensions for the Panel PC. Verify that the mounting surface is flat, clean, and provides adequate structural support.
2. 2 Mount the Unit: Insert the Panel PC into the prepared cutout from the front. Secure it from the rear using the provided mounting clamps, tightening them evenly to the manufacturer's specified torque to ensure a proper seal and prevent bezel distortion.
3. 3 Establish Ground Connection: Connect the chassis ground terminal of the Panel PC to the enclosure's main protective earth (PE) bus bar using a low-impedance conductor. A reliable ground connection is critical for safety and noise immunity.
4. 4 Connect Power Supply: With the main power source de-energized, connect the 24 V DC supply to the unit's power input terminals. Verify correct polarity (+/-) before connection. Use appropriately sized wiring and ensure the power source is stable and within the device's specified voltage range.
5. 5 Connect Peripherals and Network: Connect all required communication cables (e.g., Ethernet, serial) and I/O devices. Route cables neatly, avoiding sharp bends and proximity to high-voltage lines to minimize electromagnetic interference.