Description

The Siemens 6AV7613-0AF12-0AE0 is a SIMATIC Panel PC 670 designed for industrial control and visualization applications. This unit features a 12-inch display with an integrated keypad for operator input. It is powered by a Pentium III 500 MHz processor with 256 KB of L2 cache and is equipped with 64 MB of RAM. For data storage and program loading, the device includes an 8.4 GB Hard Disk Drive (HDD), a 1.44 MB Floppy Disk Drive (FDD), and a CD-ROM drive. The system operates on a 24V DC power supply and comes pre-installed with the Windows 98 German Edition operating system.

Features

• Processor: Intel Pentium III operating at 500 MHz
• Memory: 64 MB RAM
• Display: 12-inch screen with integrated keypad
• Storage: 8.4 GB HDD, 1.44 MB FDD, and CD-ROM drive
• Power Input: 24V DC
• Operating System: Windows 98 (German Edition)
• Product Status: Obsolete, suitable for legacy system maintenance and replacement

Applications

• Human-Machine Interface (HMI) for machine control
• Supervisory control and data acquisition (SCADA) nodes
• Process visualization and monitoring
• Factory floor data logging and diagnostics
• Replacement for existing PC670 installations

Technical Specifications

Installation Guidelines

1. 1
   De-energize Equipment: Implement lock-out/tag-out (LOTO) procedures to ensure the control panel and all related power sources are completely de-energized before beginning work. Verify absence of voltage.
2. 2
   Panel Mounting: Prepare the panel cutout according to the PC670 series specifications. Ensure the mounting surface is clean, flat, and can support the weight of the unit. Insert the Panel PC into the cutout and secure it evenly using all provided mounting clamps to ensure a proper seal.
3. 3
   Connect Power and Ground: Connect the 24V DC power supply to the designated terminals, observing correct polarity. Connect the functional earth (FE) or chassis ground terminal to the control panel's main ground bus using a low-impedance conductor.
4. 4
   Connect Peripherals: Connect any required communication cables (e.g., Ethernet, serial) and I/O devices. Ensure all connectors are fully seated and secured. Maintain proper separation between power and signal wiring.
5. 5
   System Power-Up: After verifying all connections, remove LOTO devices and re-energize the control panel. Power on the Panel PC and confirm that the operating system boots correctly and the application software loads as expected.