Description

The Siemens 6AV7614-0AF20-0BG0 is a SIMATIC Panel PC 670 designed for industrial human-machine interface (HMI) applications. This unit features a 15-inch TFT touch display and is powered by a 300 MHz Celeron processor with 128 MB of RAM. For data storage and software installation, it includes a 40 GB hard drive and an integrated CD-ROM drive. The system comes pre-installed with the Windows 2000 multi-language operating system and is configured for a 115-230V AC power supply, including a U.S. mains cable. Note that this product is considered obsolete by the manufacturer, which may impact support and availability of replacement parts.

Features

• 15-inch TFT color display with integrated touch screen
• Intel Celeron processor operating at 300 MHz
• 128 MB of system RAM
• 40 GB internal hard drive for OS and application storage
• Built-in CD-ROM drive for software installation
• Pre-loaded with Windows 2000 (Multi-language support for English, German, French, Italian, Spanish)
• Wide-range power supply compatibility (115-230V AC)

Applications

• Machine-level operator control and monitoring
• Process visualization and data acquisition (SCADA)
• Industrial data logging and recipe management
• Factory automation control panels
• Legacy system replacement or maintenance

Technical Specifications

Installation Guidelines

1. 1
   De-energize Equipment: Before installation, completely de-energize the control panel or machine. Follow all local Lockout/Tagout (LOTO) procedures to prevent accidental power-up. Verify zero energy state with a calibrated multimeter.
2. 2
   Panel Mounting: Ensure the panel cutout dimensions match the PC 670's physical requirements. Secure the unit using all provided mounting clamps to ensure a proper seal and stable installation. Verify that the mounting surface is flat and can support the unit's weight.
3. 3
   Protective Earth Connection: Connect the protective earth (PE) terminal on the Panel PC chassis to the main system ground. Use a low-impedance conductor of appropriate gauge to ensure operator safety and reduce electromagnetic interference.
4. 4
   Power and I/O Wiring: Connect the AC power supply using the provided cable. Route all communication and I/O cables away from high-voltage lines to minimize noise. Ensure all cable connectors are fully seated and secured.
5. 5
   System Power-Up: After verifying all connections, remove LOTO devices and re-energize the cabinet. Power on the Panel PC and confirm that the Windows 2000 operating system boots correctly. Proceed with software configuration and system checks.