Description

This is a Siemens 6AV7725-1AC00-0AD0, a standard configuration of the SIMATIC Panel PC 670 series. This industrial computer is designed for machine-level control and visualization tasks, featuring a 15.1-inch color TFT display for clear operator feedback. It is equipped with a Celeron 1.2 GHz processor, 128 MB of SDRAM-133, and a 40 GB EIDE hard disk drive for local data storage and application execution. The unit operates on a wide-range 115-230V AC power supply and comes pre-installed with the Windows 2000 Multi-Language operating system. Please note that this product is considered obsolete by the manufacturer, making it suitable for legacy system maintenance and spare parts inventory.

Features

• 15.1-inch integrated color TFT display
• Celeron 1.2 GHz processor for control and HMI tasks
• 128 MB SDRAM-133 system memory
• 40 GB EIDE hard disk drive for local storage
• Pre-installed with Windows 2000 Multi-Language operating system
• Integrated wide-range power supply for 115-230V AC

Applications

• Machine-level operator control and monitoring
• Process visualization and SCADA applications
• Data acquisition and logging systems
• Plant floor information display and control
• Replacement for legacy HMI systems

Technical Specifications

Installation Guidelines

1. 1 De-energize the control cabinet and apply Lockout/Tagout (LOTO) procedures to the main disconnect. Verify the absence of voltage before proceeding.
2. 2 Verify that the panel cutout dimensions match the requirements for the Panel PC 670 chassis. Ensure the mounting surface is clean, flat, and free of debris.
3. 3 Insert the Panel PC into the cutout from the front of the panel. Ensure the front bezel gasket is properly seated against the panel surface to maintain the specified ingress protection rating.
4. 4 From the rear, install and tighten the mounting clamps in a diagonal sequence to apply even pressure. Do not overtighten.
5. 5 Connect a low-impedance protective earth (PE) conductor to the designated grounding terminal on the chassis. This is critical for safety and noise immunity.
6. 6 Connect the AC power supply cable to the unit's power input connector. Ensure the source voltage matches the 115-230V AC rating.
7. 7 Connect all required communication, peripheral, and I/O cables. Secure connectors and ensure proper cable strain relief.
8. 8 After verifying all connections are secure and correct, remove the LOTO device and re-energize the cabinet to commission the Panel PC.