Description

The Siemens 6AV7802-0BB12-2AC0 is a SIMATIC Panel PC 677 designed for industrial human-machine interface (HMI) and control applications. This unit features a 15-inch touch screen with a 1024x768 resolution, providing a clear and interactive operator interface. It is powered by an Intel Pentium M 770 1.6 GHz processor and is configured with 512 MB of DDR266 SDRAM. For data storage and redundancy, it includes a dual hard disk drive system with two 60 GByte drives configured in a RAID array. The system comes pre-installed with Windows XP Professional Multi-language User Interface (MUI) and includes an integrated DVD writer and a front-accessible USB port for convenience.

Features

• 15-inch color touch screen display
• Integrated front-panel USB interface
• Intel Pentium M 1.6 GHz processor
• Dual 60 GByte hard disk drives in a RAID configuration
• DVD+-RW+-R optical drive for data backup and software installation
• Pre-installed Windows XP Professional (MUI) operating system
• Robust design for industrial environments

Applications

• Machine control and process visualization
• Data acquisition and logging systems
• Supervisory Control and Data Acquisition (SCADA) nodes
• Manufacturing Execution Systems (MES) terminals
• Automotive and assembly line control panels

Technical Specifications

Installation Guidelines

1. 1 Panel Preparation: Ensure the control cabinet or panel has a clean, flat, and correctly sized cutout according to the manufacturer's mounting specifications. Verify that the mounting surface thickness is within the supported range for the panel's clamping mechanism.
2. 2 Mounting: Insert the Panel PC into the cutout from the front. Secure it from the rear using the provided mounting clamps. Tighten the clamp screws evenly in a diagonal pattern to ensure a uniform seal against the panel gasket, maintaining the specified IP rating. Do not overtighten.
3. 3 Grounding: Connect the chassis grounding terminal to the main protective earth (PE) busbar of the cabinet using a short, low-impedance grounding conductor. A proper ground connection is essential for safety and noise immunity.
4. 4 Power Connection: Connect the specified AC power source (110-230V AC) to the power input terminal. Ensure the power source is stable and protected by an appropriate circuit breaker or fuse. Use the provided power cable or an equivalent certified cable.
5. 5 I/O and Network Connections: Connect all required communication, network (Ethernet), and peripheral (USB, serial) cables. Route cables to avoid interference from high-power lines and ensure proper strain relief. Use shielded cables for communication lines where specified.