Description

The Siemens 6ES7647-7BK20-0DA0 is a SIMATIC IPC427C series industrial microbox PC, engineered for reliable operation in demanding automation environments. This compact unit is powered by an Intel Core2 Duo 1.2 GHz processor with an 800 MHz FSB and a 3 MB SLC cache, ensuring stable performance for control and monitoring tasks. It is equipped with 1 GB of DDR3 1066 SODIMM memory for effective multitasking. For industrial networking, the device includes an integrated PROFIBUS DP 12 interface. Storage is handled by a durable 50 GB high-endurance SATA Solid-State Drive (SSD), which comes with Windows Embedded Standard 2009 pre-installed.

Features

• Processor: Intel Core2 Duo at 1.2 GHz
• Memory: 1 GB DDR3 1066 SODIMM
• Storage: 50 GB High-Endurance SATA SSD
• Communication: Integrated PROFIBUS DP 12 Interface
• Operating System: Windows Embedded Standard 2009 (Pre-installed)
• Compact, fanless design for industrial use

Applications

• Production Line Control and Monitoring
• Data Acquisition and Logging Systems
• Human-Machine Interface (HMI) Applications
• Process Visualization and SCADA
• Embedded Control Systems

Technical Specifications

Installation Guidelines

1. 1
   De-energize System: Before installation, completely disconnect all power sources to the control panel or machine. Verify the absence of voltage using a calibrated multimeter.
2. 2
   Mount the IPC: Securely mount the Microbox PC to a stable, grounded surface or DIN rail within the control cabinet, ensuring adequate clearance for ventilation and cable access.
3. 3
   Connect Chassis Ground: Connect the chassis ground terminal of the IPC directly to the main cabinet ground bus using a low-impedance conductor. This is critical for electrical safety and noise immunity.
4. 4
   Connect Power and I/O: Connect the DC power supply, PROFIBUS DP, and any other peripheral cables. Ensure all connectors are fully seated and secured. Route signal cables separately from high-voltage power lines to prevent interference.
5. 5
   System Verification: After confirming all connections are correct and secure, remove LOTO devices and re-apply power to the system. Verify the IPC boots correctly and establishes communication on the network.