Description

The Siemens 6ES7716-2CB10-0EC4 is a SIMATIC Field PG M4 Premium Plus, a ruggedized industrial programming device designed for commissioning, servicing, and maintaining automation systems. This unit is equipped with an Intel Core i7-35X0M processor with a base clock of 2.9 GHz, 16 GB of RAM, and a 300 GB SATA solid-state drive for responsive performance. It features a 15.6-inch Full HD display and comes pre-loaded with a dual-boot configuration of Windows 7 Ultimate and Windows XP Professional. For comprehensive compatibility, it includes an integrated S5 interface with an S5-EPROMMER and is licensed for a suite of SIMATIC engineering software, including STEP 7 Professional, WinCC Advanced, and STEP 5.

Features

• Intel Core i7-35X0M processor (4M Cache, 2.9 GHz, up to 3.6 GHz with Turbo Boost)
• 16 GB RAM (2x 8 GB modules)
• 300 GB SATA Solid-State Drive (SSD)
• 15.6-inch Full HD display (1920x1080 resolution)
• Integrated S5 interface and S5-EPROMMER for legacy PLC support
• Dual-boot operating systems: Windows 7 Ultimate SP1 (64-bit) and Windows XP Professional SP3
• Pre-installed licenses for STEP 7, WinCC, and STEP 5
• Built-in DVD RW optical drive
• Includes MPI and S5-AG PLC communication cables

Applications

• PLC and HMI programming and configuration
• Commissioning of industrial automation systems
• On-site diagnostics and troubleshooting
• System maintenance and software updates
• Legacy SIMATIC S5 system support and migration

Technical Specifications

Installation Guidelines

1. 1 Initial Inspection: Upon receipt, carefully inspect the Field PG and its accessories for any signs of damage that may have occurred during transit. Verify that all listed components, including power and communication cables, are present.
2. 2 Power Connection: Select the appropriate power cord for your region from the supplied set. Connect it securely to the Field PG's power adapter and a stable, grounded AC power source. It is recommended to fully charge the battery before initial field use.
3. 3 System Startup: Power on the device. During the boot process, you will be prompted to select the desired operating system (Windows 7 or Windows XP). Choose the OS required by your specific engineering software or project.
4. 4 Software Verification: Once the OS has loaded, launch the required SIMATIC software (e.g., STEP 7, WinCC) to ensure licenses are active and the software is functioning correctly. No separate installation is required for the pre-loaded suite.
5. 5 Controller Connection: Use the appropriate communication cable (e.g., MPI for S7-300/400, S5-AG for S5) to establish a connection between the Field PG and the target automation device. Ensure the cable is securely fastened at both ends before attempting to go online.