Designed to drive high-current actuators directly in decentralized industrial architectures, the Beckhoff IP2042-B318 establishes a rugged, high-density digital control interface over PROFIBUS DP networks. This IP67-rated module facilitates direct on-machine installation without a protective control cabinet, consolidating 8 channels of digital outputs operating at 24 V DC. With a heavy-duty capacity of 2 A per channel (up to an aggregate limit of 12 A), the unit is engineered to power demanding field loads such as solenoid valves, contactors, and indicators in challenging industrial environments.
| Parameter | Value |
|---|---|
| Manufacturer | Beckhoff |
| Model Number | IP2042-B318 |
| Protocol / Interface | PROFIBUS DP |
| Number of Outputs | 8 digital outputs |
| Output Type | Ohmic, inductive, and lamp loads |
| Nominal Output Voltage | 24 V DC (-15 % / +20 %) |
| Max. Output Current | 2 A per channel (short-circuit proof) |
| Total Aggregate Current | Max. 12 A total (Grouped limits: Channels 0-3 sum 4 A; 4-5 sum 4 A; 6-7 sum 4 A) |
| Data Transfer Rates | Automatic detection up to 12 Mbaud |
| Power Supply Connection | Feed: 2 x M8 male socket, 4-pin (no downstream pass-through) |
| Box Supply Current | 85 mA + sensor consumption (Max. 0.5 A) |
| Housing Material | Polyamide (PA6) |
| Dimensions (W x H x D) | 30 mm x 210 mm x 26.5 mm (XXL Housing) |
| Protection Rating | IP65 / IP66 / IP67 (conforms to EN 60529) |
| Operating Temperature | 0 to +55 degC |
| Storage Temperature | -25 to +85 degC |
| Shipping Weight (Calculated) | 2.0 kg |
| Interface Type | Connector Details | Functional Assignment |
|---|---|---|
| PROFIBUS Input | 1 x M12 plug, 5-pin, B-coded | Incoming fieldbus communication line |
| PROFIBUS Output | 1 x M12 socket, 5-pin, B-coded | Downstream line extension (Integrated T-connector) |
| Digital Outputs (0 to 7) | M12, screw type sockets | 24 V DC actuators / load connections |
| Power Supply | 2 x M8 male socket, 4-pin | Control voltage (Us) and Load voltage (Up) feed lines |
The IP2042-B318 is built specifically for PROFIBUS DP architectures. When transitioning from classic cabinet modules to machine-mount field modules, verify that your PLC's hardware configuration utilizes the correct GSD database file for the IPxxxx-B31x series. Ensure that the bus master supports DP-V1 extensions if remote diagnostics or software-based configuration via KS2000 is required.
While individual outputs are rated for up to 2 A, the module's total aggregate output is constrained by internal grouping limits to prevent localized overheating. Ensure your design maps high-draw actuators across separate logical groups (Channel 0 to 3, Channel 4 to 5, and Channel 6 to 7) to avoid tripping the individual 4 A group thermal protection limits even if the total load stays below the overall 12 A maximum limit.
To guarantee network stability, use high-quality, double-shielded copper PROFIBUS cables (2 x 0.25 mm²). Ensure the B-coded M12 connections are fully torqued to maintain the IP67 ingress protection rating. Unused M12 and M8 ports must be sealed with protective screw caps to prevent moisture ingress, which can disrupt internal diagnostic systems or lead to ground faults.
Mount the module housing directly to the machine frame using the two 3.5 mm diameter mounting holes. Use standard M3 fasteners to secure the unit.
Connect the incoming PROFIBUS line to the B-coded M12 plug interface, and route downstream segments from the integrated M12 socket if utilizing a daisy-chain setup.
Wire the actuators to the respective M12 output screw-type sockets. Securely tighten to guarantee seal contact.
Plug in the M8 control and load power supplies, verify polarity, seal all unused interfaces, and energize the system.
Global Express Shipping
Returns & Warranty
Manufacturer: BECKHOFF
Product No.: IP2042-B318
Country of origin:Germany
Product Type: Fieldbus Box Modules
Payment: T/T, Western Union
Weight: 2000g
Dimensions: 30 mm x 210 mm x 26.5 mm
Shipping port: Xiamen
Warranty: 12 months
Designed to drive high-current actuators directly in decentralized industrial architectures, the Beckhoff IP2042-B318 establishes a rugged, high-density digital control interface over PROFIBUS DP networks. This IP67-rated module facilitates direct on-machine installation without a protective control cabinet, consolidating 8 channels of digital outputs operating at 24 V DC. With a heavy-duty capacity of 2 A per channel (up to an aggregate limit of 12 A), the unit is engineered to power demanding field loads such as solenoid valves, contactors, and indicators in challenging industrial environments.
| Parameter | Value |
|---|---|
| Manufacturer | Beckhoff |
| Model Number | IP2042-B318 |
| Protocol / Interface | PROFIBUS DP |
| Number of Outputs | 8 digital outputs |
| Output Type | Ohmic, inductive, and lamp loads |
| Nominal Output Voltage | 24 V DC (-15 % / +20 %) |
| Max. Output Current | 2 A per channel (short-circuit proof) |
| Total Aggregate Current | Max. 12 A total (Grouped limits: Channels 0-3 sum 4 A; 4-5 sum 4 A; 6-7 sum 4 A) |
| Data Transfer Rates | Automatic detection up to 12 Mbaud |
| Power Supply Connection | Feed: 2 x M8 male socket, 4-pin (no downstream pass-through) |
| Box Supply Current | 85 mA + sensor consumption (Max. 0.5 A) |
| Housing Material | Polyamide (PA6) |
| Dimensions (W x H x D) | 30 mm x 210 mm x 26.5 mm (XXL Housing) |
| Protection Rating | IP65 / IP66 / IP67 (conforms to EN 60529) |
| Operating Temperature | 0 to +55 degC |
| Storage Temperature | -25 to +85 degC |
| Shipping Weight (Calculated) | 2.0 kg |
| Interface Type | Connector Details | Functional Assignment |
|---|---|---|
| PROFIBUS Input | 1 x M12 plug, 5-pin, B-coded | Incoming fieldbus communication line |
| PROFIBUS Output | 1 x M12 socket, 5-pin, B-coded | Downstream line extension (Integrated T-connector) |
| Digital Outputs (0 to 7) | M12, screw type sockets | 24 V DC actuators / load connections |
| Power Supply | 2 x M8 male socket, 4-pin | Control voltage (Us) and Load voltage (Up) feed lines |
The IP2042-B318 is built specifically for PROFIBUS DP architectures. When transitioning from classic cabinet modules to machine-mount field modules, verify that your PLC's hardware configuration utilizes the correct GSD database file for the IPxxxx-B31x series. Ensure that the bus master supports DP-V1 extensions if remote diagnostics or software-based configuration via KS2000 is required.
While individual outputs are rated for up to 2 A, the module's total aggregate output is constrained by internal grouping limits to prevent localized overheating. Ensure your design maps high-draw actuators across separate logical groups (Channel 0 to 3, Channel 4 to 5, and Channel 6 to 7) to avoid tripping the individual 4 A group thermal protection limits even if the total load stays below the overall 12 A maximum limit.
To guarantee network stability, use high-quality, double-shielded copper PROFIBUS cables (2 x 0.25 mm²). Ensure the B-coded M12 connections are fully torqued to maintain the IP67 ingress protection rating. Unused M12 and M8 ports must be sealed with protective screw caps to prevent moisture ingress, which can disrupt internal diagnostic systems or lead to ground faults.
Mount the module housing directly to the machine frame using the two 3.5 mm diameter mounting holes. Use standard M3 fasteners to secure the unit.
Connect the incoming PROFIBUS line to the B-coded M12 plug interface, and route downstream segments from the integrated M12 socket if utilizing a daisy-chain setup.
Wire the actuators to the respective M12 output screw-type sockets. Securely tighten to guarantee seal contact.
Plug in the M8 control and load power supplies, verify polarity, seal all unused interfaces, and energize the system.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
Germany
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
