Bently Nevada 22810-00-05-10-02 7200 5 mm and 8 mm Standard Mount Probe

Description

The 22810-00-05-10-02 is an 8 mm Standard Mount Proximity Probe from the Bently Nevada 7200 series, featuring an integrated stainless steel armored cable for enhanced mechanical protection. This eddy-current transducer system provides non-contact displacement measurement, designed for monitoring shaft vibration and axial position in critical rotating machinery such as gas and steam turbines, compressors, and pumps.

This specific configuration includes a 3/8-24 threaded body (Option 00 unthreaded length), a 0.5-inch case length (Option 05), a 1.0 metre total lead length (Option 10), and a miniature male coaxial connector (Option 02). Engineered for harsh environments, the probe is constructed from polyphenylene sulfide (PPS), a high-performance plastic capable of resisting chemical exposure, ensuring reliable performance in demanding industrial installations.

Features

• 8 mm diameter probe tip, compatible with 7200 series Proximitor sensors.
• Integrated stainless steel armor for physical protection against abrasion and debris.
• Miniature male coaxial connector for integration into standard 7200 monitoring chains.
• Linear measuring range of 80 mils (2.0 mm), suitable for high-accuracy gap measurements.
• Frequency response from 0 Hz (DC) to 10 kHz for dynamic and static signal capture.
• Constructed from PPS plastic, providing excellent chemical and moisture resistance.

Applications

• Radial vibration monitoring to detect rotor imbalance and misalignment.
• Axial thrust position measurement to monitor bearing wear.
• Shaft average radial position for rotor stability analysis.
• Eccentricity measurement to identify rotor bow.
• Compatible with Bently Nevada 3300 and 9000 monitoring systems.

Ordering Information

Technical Specifications

Installation Guidelines

• Ensure the probe is securely mounted using the provided jam nut to prevent vibration-induced loosening.
• Maintain proper clearance from the observed target; the calibrated range begins at approximately 10 mils (0.25 mm) from the probe face.
• Route coaxial cables through protective conduit where possible to prevent mechanical damage.
• Ensure connections are clean and fully seated to maintain signal integrity between the probe and Proximitor.