Manufacturer: Bently Nevada
Product No.: 330101-00-24-10-01-CN
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probes
Payment: T/T, Western Union
Weight: 320g
Shipping port: Xiamen
Warranty: 12 months
Bently Nevada 330101-00-24-10-01-CN is a 3300 XL 8 mm eddy current proximity probe for shaft vibration and position measurement in rotating machinery. Moreover, it is fully compatible with Bently Nevada 3300 XL Proximitor® sensors and monitoring systems.
| Item | Specification |
|---|---|
| Manufacturer | Bently Nevada |
| Series | 3300 XL |
| Product Type | 8 mm Proximity Probe |
| Model Number | 330101-00-24-10-01-CN |
| Origin | U.S.A |
| Probe Diameter | 8 mm |
| Unthreaded Length | 0 in |
| Case Length | 2.4 in (61 mm) |
| Cable Length | 1.0 m (3.3 ft) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 / 304 Stainless Steel |
| Sealing | Viton® O-ring |
| Measurement Principle | Eddy current, non-contact |
| Sensitivity (Typical) | 7.87 V/mm (200 mV/mil) |
| Linear Range (Typical) | 2.0 mm (80 mils) |
| Frequency Response (Typical) | DC – 10 kHz |
| Operating Temperature (Typical) | –35 °C to +177 °C |
| Storage Temperature (Typical) | –51 °C to +200 °C |
| Connector Type | Miniature coaxial ClickLoc™ |
| Cable Type | Standard coaxial |
| Agency Approval | CN (Country-specific) |
| Net Weight | 0.323 kg |
| Shipping Weight | Approx. 2 kg |
Turbines, compressors, pumps, and motors for shaft vibration, axial position, and displacement monitoring.
Global Express Shipping
Returns & Warranty
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Color pattern |
Silver
Blue
|
| Country of origin |
United States
|
Check 1771-IG TTL HIGH/LOW logic thresholds, field supply ripple and 1771-WC wiring before replacing an input module.
A field checklist for distinguishing Danfoss 060G2105, 060G1323 and 060G2109 by pressure range, fitting, loop signal and controller scaling.
A field checklist for separating 24 VDC input, carrier bus, output derating and alarm-contact faults before replacing an Emerson SE5009.
A controlled commissioning method for using the 140XSM00200 simulator to verify Modicon Quantum input mapping and interlocks before reconnecting field wiring.
A commissioning checklist for the ProSoft PLX32-EIP-MBTCP covering subnet separation, register contracts, EtherNet/IP timing, failure tests and replacement records.
A field checklist for IC693MDL916 relay commands, terminal blocks, load current, switching rate and contact-side measurements.
