Bently Nevada 330101-00-48-05-02-00 3300 XL 8 mm Proximity Probe

Description

The 330101-00-48-05-02-00 is a 3300 XL 8 mm proximity probe configured with a 3/8-24 UNF thread, 0.0 in unthreaded length (Option 00), and a 4.8 in case length (Option 48). This probe is designed for non-contact, eddy-current displacement measurement within 3300 XL 8 mm transducer systems, providing accurate shaft vibration and axial position data for critical rotating machinery.

This configuration features a 0.5 m total length (Option 05) and utilizes a miniature ClickLoc coaxial connector with standard cabling (Option 02). As a non-hazardous area variant (Option 00, no agency approvals), it is standard for industrial environments where intrinsic safety or explosion-proof certifications are not required. The 8 mm probe design is fully compatible with 3300 XL Proximitor sensors and extension cables, maintaining system-wide accuracy and signal integrity for condition monitoring applications.

Features

• Option 00: 0.0 in unthreaded length, fully threaded 3/8-24 UNF steel body
• Option 48: 4.8 in overall case length
• Option 05: 0.5 m total system length
• Option 02: Miniature ClickLoc coaxial connector with standard coaxial cable
• Option 00: No agency approval required
• Maintains system compatibility with 3300 XL Proximitor sensors and standard 3300 XL extension cables

Applications

• Turbine and compressor shaft vibration monitoring
• Rotor axial position measurement
• Critical rotating machinery protection
• Fluid-film bearing condition monitoring

Ordering Information

Technical Specifications

Installation Guidelines

Ensure that the probe is installed using the appropriate 3/8-24 UNF mounting hardware. Maintain the recommended gap distance between the probe tip and the target shaft as specified in the 3300 XL system manual. Verify that the cable is routed away from high-interference sources and that the connector is secure. For environmental protection, ensure all connections are kept dry and free from contaminants.