Bently Nevada 330101-00-60-10-02-00 3300 XL 8 mm Proximity Probe

Only 3 item(s) left in stock

Manufacturer: Bently Nevada
Product No.: 330101-00-60-10-02-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 140g
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months

View full details

Description

The 330101-00-60-10-02-00 3300 XL 8 mm proximity probe features a 0.0 in unthreaded length (Option 00) and a 6.0 in case length (Option 60). This eddy-current displacement transducer provides a 1.0 m total length (Option 10) and is equipped with a miniature ClickLoc coaxial connector (Option 02) without agency approval requirements (Option 00). It acts as a primary component in 3300 XL monitoring chains, converting shaft vibration and axial position into proportional electrical signals for signal processing by a Proximitor sensor.

This 8 mm probe configuration is designed for permanent installation in industrial machinery where non-contact monitoring is required. The system maintains linear output across a wide gap range, ensuring accurate measurement of rotor dynamics, including radial vibration and axial position, when integrated with a matched 330180 Proximitor sensor and 330130 extension cable.

Features

Option 00: 0.0 in unthreaded probe length
Option 60: 6.0 in case length for standard installation depth
Option 10: 1.0 m total system length
Option 02: Miniature ClickLoc connector with standard cable
Option 00: Not required agency approval
Eddy-current principle for non-contact displacement measurement
Compatible with 3300 XL series Proximitor sensors and extension cables

Applications

Radial vibration and axial position monitoring on large rotating machinery
Steam turbines, gas turbines, and centrifugal compressors
Hydroelectric generators and large industrial motors
Critical machinery protection where contactless sensing is required

Ordering Information

Option	Code on This SKU	Description
Orderable Part Number	330101-00-60-10-02-00	3300 XL 8 mm Proximity Probe
A - Unthreaded Length	00	0.0 in
B - Case Length	60	6.0 in
C - Total Length	10	1.0 m
D - Connector/Cable	02	Miniature ClickLoc, standard cable
E - Agency Approval	00	Not required

Technical Specifications

Manufacturer	Bently Nevada
Part Number	330101-00-60-10-02-00
Probe Diameter	8 mm
Thread Size	3/8-24 UNF-2A
Linear Range	2 mm (80 mil)
Linearity	Within 0.025 mm (1 mil) over 2 mm range
Temperature Range (Operating)	-51 degC to 177 degC
Probe Material	AISI 303 or 304 stainless steel
Cable Type	75 ohm coaxial, fluoroethylene propylene (FEP) insulated

Installation Guidelines

Ensure the probe is mounted in a location that minimizes mechanical interference with the target surface.
Maintain the specified probe-to-target gap as defined in the system calibration documentation.
Use proper shielding and routing practices for coaxial extension cables to prevent electrical noise interference.
Verify all connector interfaces are clean and fully seated to ensure signal integrity.

Model Number / Title	Condition	Availability	Action
Bently Nevada 330901-00-78-10-02-00 3300 XL NSv Proximity Probe	Original New	In Stock	View Details
Bently Nevada 330104-00-04-10-11-01 3300 XL 8 mm Proximity Probe	Original New	In Stock	View Details
Bently Nevada 330104-00-04-10-02-01 3300 XL 8 mm Proximity Probe	Original New	In Stock	View Details

Key Features:

#Bently Nevada 3300 XL #Proximity Probes

Product Documentation

Technical Datasheet (PDF) Complete specifications and technical drawings.

What does the 60 in the 330101-00-60-10-02-00 part number indicate?

The 60 in the second segment refers to the case length of the probe, which is 6.0 inches.

Is this probe compatible with standard 3300 XL extension cables?

Yes, this probe is designed for use with the 3300 XL 8 mm system, which uses standard 330130 extension cables.

What is the primary function of this probe?

It is an eddy-current transducer used to measure shaft radial vibration and axial position in critical rotating machinery.

Does this specific SKU come with hazardous area certifications?

No, Option 00 for Agency Approval indicates that this specific configuration does not carry hazardous area certifications.

Global Express Shipping

Standard Delivery: 4-6 Business Days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries, including rapid delivery to Saudi Arabia and UAE.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our professional technical warranty.

Orders are processed and delivered Monday-Friday (excluding public holidays).

For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .

TECHNICAL SPECIFICATIONS

Country of origin

Technical knowledge

Electric Actuators Designed to Replace Fluids: Hands-on Tutorial

Electric Actuators Designed to Replace Fluid Power Systems: A Practical Industrial Automation Guide

This article explains how integrated electric actuators, such as SMC’s e-Actuator series, are transforming industrial motion control by replacing traditional pneumatic and hydraulic systems. It...

June 23, 2026

$Math Operations Using OpenPLC for Industrial Automation Applications$

Bently Nevada 330101-00-60-10-02-00 3300 XL 8 mm Proximity Probe