1 / 3

Bently Nevada 330101-10-27-05-02-00 3300 XL 8 mm Proximity Probe

SKU 330101-10-27-05-02-00

In stock

12-month warranty
Free returns within 30 days

Manufacturer: Bently Nevada
Product No.: 330101-10-27-05-02-00
Origin United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 0.14 kg
Dimensions: 45 mm x 95 mm x 95 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months

Product Description

Description

Mechanical specifications of a 1.0-inch unthreaded length (Option 10) and 2.7-inch overall case length (Option 27) define the 330101-10-27-05-02-00 proximity probe, configured without armor and equipped with a 0.5-meter total length standard cable.

This specific configuration features a standard miniature coaxial ClickLoc connector (Option 02) without a connector protector and does not require hazardous area approvals (Option 00). Unlike armored sibling configurations (such as those in the 330102 series) or variants with longer 1.0-meter or 2.0-meter leads, this 0.5-meter unarmored probe provides compact cable management and is designed for direct integration with 3300 XL series Proximitor sensors and extension cables in rotating machinery vibration monitoring systems.

Features

Option 10 specifies 1.0 inch (25.4 mm) unthreaded length.
Option 27 provides a 2.7 inch (68.6 mm) overall case length with 3/8-24 UNF standard thread.
Option 05 configures a 0.5 meter (1.6 feet) total probe cable length without mechanical armor.
Option 02 provides a miniature coaxial ClickLoc connector with a standard cable jacket.
Option 00 specifies that agency approvals are not required for general-purpose installations.
8 mm probe tip diameter designed for eddy-current non-contact displacement measurements.
Viton O-ring seal provides differential pressure sealing between the probe tip and case.

Applications

Steam and gas turbine shaft vibration and axial position monitoring.
Compressor and pump rotor displacement and casing expansion measurements.
Permanent monitoring systems on rotating machinery bearing housings.
Industrial environments requiring high-reliability non-contact shaft alignment measurements.

Ordering Information

Option / Segment	Code on This SKU	Description
Orderable Part Number	330101-10-27-05-02-00	3300 XL 8 mm proximity probe, 3/8-24 UNF thread, without armor
A - Unthreaded Length Option	10	1.0 in (25.4 mm) unthreaded length
B - Overall Case Length Option	27	2.7 in (68.6 mm) overall case length
C - Total Length Option	05	0.5 meter (1.6 feet) total length
D - Connector and Cable-Type Option	02	Miniature coaxial ClickLoc connector, standard cable
E - Agency Approval Option	00	Not required

Technical Specifications

Parameter	Specification
Manufacturer	Bently Nevada
Model / Part Number	330101-10-27-05-02-00
Probe Tip Diameter	8 mm
Thread Size	3/8-24 UNF-2A
Unthreaded Length	1.0 inch (25.4 mm)
Overall Case Length	2.7 inches (68.6 mm)
Total Length	0.5 meter (1.6 feet)
Connector Type	Miniature coaxial ClickLoc
Armor Option	Without armor
Operating Principle	Eddy current
Nominal DC Resistance (R_PROBE)	7.45 ohms +/- 0.50 ohms (center to outer conductor)
Linear Range	2.0 mm (80 mils), from approximately 0.25 to 2.25 mm (10 to 90 mils)
Scale Factor	7.87 V/mm (200 mV/mil) nominal
Probe Temperature Range	-52 degC to +177 degC (-62 degF to +350 degF)
Probe Tip Sealing	Viton O-ring differential pressure seal
Recommended Tightening Torque	Finger tight (coaxial connector)
Weight	0.14 kg
Dimensions (H x W x D)	45 mm x 95 mm x 95 mm (H x W x D)

Connections and Interfaces

Connector Component	Function
Center Conductor	Signal (High)
Outer Conductor	Shield / Common (Low)

Installation Guidelines

Mount with the appropriate probe gap (nominally 1.27 mm or 50 mils) corresponding to the system calibration.
Route the probe cable using proper shielding and grounding practices to prevent electromagnetic interference.
Avoid exceeding the maximum thread engagement length of 0.563 inches to prevent binding during installation.
Ensure the unthreaded length (1.0 inch) is at least 0.8 inches less than the case length (2.7 inches), which this configuration satisfies.
Hand-tighten the miniature coaxial ClickLoc connectors; do not use pliers unless mating with a non-XL stainless steel connector.

Shipping & Returns

Global Express Shipping

Standard Delivery: 4–6 business days via DHL, FedEx, and UPS.
Express Dispatch: Same-day dispatch for in-stock orders placed before 2:00 PM (GMT+8).
Worldwide Coverage: Serving over 150 countries.

Returns & Warranty

30-Day Guarantee: Returns accepted for in-stock products in original, factory-sealed packaging.
12-Month Warranty: Every industrial component is backed by our technical warranty.

FAQ

What does the 330101-10-27-05-02-00 configuration specify?

This configuration specifies a 3300 XL 8 mm proximity probe with a 1.0-inch unthreaded body length, a 2.7-inch overall case length, a 0.5-meter (1.6 feet) total length, a standard miniature coaxial ClickLoc connector, and no hazardous area agency approvals.

Can this 0.5-meter proximity probe be used directly with any Proximitor sensor?

The 0.5-meter probe is designed to be paired with a matching 3300 XL extension cable and a Proximitor sensor. The total combined length of the probe and extension cable must equal the calibrated length of the Proximitor sensor (typically 5.0 meters or 9.0 meters).

Does this probe model include mechanical armor?

No, the 330101 series probes are supplied without mechanical armor. For applications requiring steel conduit armor over the cable, the 330102 series should be used.

What is the nominal electrical resistance of this 0.5-meter probe?

The nominal DC resistance of this probe is 7.45 ohms plus or minus 0.50 ohms when measured between the center conductor and the outer conductor.

Reviews

330101-10-27-05-02-00

Stock & lead time on request

Call

1 3