Bently Nevada 330102-00-13-15-02-05 3300 XL 8 mm Proximity Probe

Description

330102-00-13-15-02-05: 3300 XL 8 mm proximity probe with integrated armored cable, 3/8-24 UNF thread, and CSA/ATEX/IECEx hazardous area certifications. This configuration features a 0.0 in unthreaded length (Option 00) and a 1.3 in case length (Option 13) designed for robust machinery vibration and position monitoring in demanding industrial environments.

The 330102 series probe includes mechanical armor for enhanced protection against physical abrasion in harsh environments. This unit integrates with 3300 XL 8 mm Proximitor sensors and 3300 XL extension cables to form a complete, calibrated measurement chain. The 1.5 m total system length (Option 15) is fully compatible with standard 3300 XL monitoring system architecture, providing reliable, non-contact eddy-current displacement measurement for rotating shafts.

Features

• 3/8-24 UNF thread with armored probe body for physical protection
• 0.0 in unthreaded length and 1.3 in case length configuration
• 1.5 m total system length
• Standard ClickLoc miniature coaxial connector (no connector protector)
• CSA, ATEX, and IECEx hazardous area approvals
• Compatible with 3300 XL 8 mm Proximitor sensors and extension cables

Applications

This proximity probe is used in critical machinery protection and condition monitoring applications, including steam turbines, gas turbines, compressors, centrifugal pumps, and gearboxes. It provides precise measurements for shaft vibration, axial position, and rotor speed in both safe and hazardous plant locations.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped correctly according to the 3300 XL system manual. When installing armored probes, avoid sharp bends that could compromise the integrity of the armor or the cable jacket. Use recommended mounting brackets (e.g., Bently Nevada aluminum or phenolic threaded brackets) and ensure the probe is securely tightened to prevent vibration loosening. Maintain clear separation between signal cabling and high-voltage power lines to minimize electromagnetic interference.