330102-00-40-10-11-05 specifies this 3300 XL 8 mm proximity probe configuration with a 3/8-24 UNF thread, fully threaded case (Option 00), 4.0 in case length (Option 40), 1.0 m total length (Option 10), FluidLoc cable with connector protector (Option 11), and CSA/ATEX/IECEx agency approvals (Option 05).
This configuration differs from standard 330102 configurations by including a FluidLoc coaxial cable (Option 11) rather than standard cable (Option 02), which prevents lube oil or other fluids from leaking out of the machine through the cable interior. It features a fully threaded 4.0 in case length (Option 00 unthreaded, Option 40 case length) and incorporates CSA, ATEX, and IECEx approvals (Option 05) for operation in hazardous locations. The system operates by generating a high-frequency electromagnetic field that interacts with a metal target (typically AISI 4140 steel) to monitor shaft vibration and axial position, pairing with a 3300 XL Proximitor sensor and a compatible 3300 XL extension cable to achieve a total system length of either 5.0 meters or 9.0 meters.
| Option Segment | Code | Meaning |
|---|---|---|
| Orderable Part Number | 330102-00-40-10-11-05 | 3300 XL 8 mm proximity probe with stainless steel armor, 3/8-24 UNF thread |
| A - Unthreaded Length | 00 | 0.0 in unthreaded length (fully threaded) |
| B - Overall Case Length | 40 | 4.0 in overall case length |
| C - Total Length | 10 | 1.0 meter (3.3 feet) total probe length |
| D - Connector/Cable Type | 11 | Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable |
| E - Agency Approval | 05 | CSA, ATEX, IECEx hazardous area approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330102-00-40-10-11-05 |
| System Type | 3300 XL 8 mm Proximity Transducer System |
| Thread Size | 3/8-24 UNF-2A |
| Case Material | AISI 303 stainless steel (SST) |
| Tip Material | Polyphenylene sulfide (PPS) |
| Unthreaded Length | 0.0 in (0.0 mm) |
| Case Length | 4.0 in (101.6 mm) |
| Total Length | 1.0 meter (3.3 feet) |
| Cable Type | 75-ohm triaxial FluidLoc, FEP insulated |
| Armor Protection | Flexible AISI 302 or 304 SST with FEP outer jacket |
| Connector Type | Miniature male coaxial ClickLoc with pre-installed connector protector |
| Probe DC Resistance (R_PROBE) | 7.59 ohms +/- 0.50 ohms (center to outer conductor) |
| Linear Range | 2.0 mm (80 mils) typical |
| Average Scale Factor | 7.87 V/mm (200 mV/mil) typical |
| Operating Temperature Range | -52 degC to +177 degC (-62 degF to +350 degF) |
| Pressure Seal Rating | Tip sealed to probe case with Viton O-ring |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Maximum Rated) | 330 N (75 lbf) probe case to lead |
| Weight | 0.34 kg (340 g) |
| Dimensions | 220 mm x 220 mm x 35 mm (H x W x D) (Packaged/Coiled) |
Maintain a minimum cable bend radius of 25.4 mm (1.0 in) during routing to prevent cable damage. Torque probe case into mounting thread up to a maximum of 22.6 N-m (200 in-lbf). Use of the pre-installed connector protector shields the ClickLoc connection from oil, moisture, and debris. Verify that the combined length of the probe and extension cable matches the calibrated length of the Proximitor sensor (typically 5.0 or 9.0 meters total). Route probe cables away from high-voltage lines to minimize electromagnetic interference.
This device complies with CSA (Class I, Div 1, Groups A, B, C, D; Class II, Div 1, Groups E, F, G; Class III) and ATEX / IECEx (Ex ia IIC T1...T5 Ga / Ex ia IIIC T* Db) certifications for safe installation in hazardous and explosive atmospheres.
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330102-00-40-10-11-05
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 340g
Dimensions: 220 mm x 220 mm x 35 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
330102-00-40-10-11-05 specifies this 3300 XL 8 mm proximity probe configuration with a 3/8-24 UNF thread, fully threaded case (Option 00), 4.0 in case length (Option 40), 1.0 m total length (Option 10), FluidLoc cable with connector protector (Option 11), and CSA/ATEX/IECEx agency approvals (Option 05).
This configuration differs from standard 330102 configurations by including a FluidLoc coaxial cable (Option 11) rather than standard cable (Option 02), which prevents lube oil or other fluids from leaking out of the machine through the cable interior. It features a fully threaded 4.0 in case length (Option 00 unthreaded, Option 40 case length) and incorporates CSA, ATEX, and IECEx approvals (Option 05) for operation in hazardous locations. The system operates by generating a high-frequency electromagnetic field that interacts with a metal target (typically AISI 4140 steel) to monitor shaft vibration and axial position, pairing with a 3300 XL Proximitor sensor and a compatible 3300 XL extension cable to achieve a total system length of either 5.0 meters or 9.0 meters.
| Option Segment | Code | Meaning |
|---|---|---|
| Orderable Part Number | 330102-00-40-10-11-05 | 3300 XL 8 mm proximity probe with stainless steel armor, 3/8-24 UNF thread |
| A - Unthreaded Length | 00 | 0.0 in unthreaded length (fully threaded) |
| B - Overall Case Length | 40 | 4.0 in overall case length |
| C - Total Length | 10 | 1.0 meter (3.3 feet) total probe length |
| D - Connector/Cable Type | 11 | Miniature coaxial ClickLoc connector with connector protector, FluidLoc cable |
| E - Agency Approval | 05 | CSA, ATEX, IECEx hazardous area approvals |
| Manufacturer | Bently Nevada (Baker Hughes) |
| Part Number | 330102-00-40-10-11-05 |
| System Type | 3300 XL 8 mm Proximity Transducer System |
| Thread Size | 3/8-24 UNF-2A |
| Case Material | AISI 303 stainless steel (SST) |
| Tip Material | Polyphenylene sulfide (PPS) |
| Unthreaded Length | 0.0 in (0.0 mm) |
| Case Length | 4.0 in (101.6 mm) |
| Total Length | 1.0 meter (3.3 feet) |
| Cable Type | 75-ohm triaxial FluidLoc, FEP insulated |
| Armor Protection | Flexible AISI 302 or 304 SST with FEP outer jacket |
| Connector Type | Miniature male coaxial ClickLoc with pre-installed connector protector |
| Probe DC Resistance (R_PROBE) | 7.59 ohms +/- 0.50 ohms (center to outer conductor) |
| Linear Range | 2.0 mm (80 mils) typical |
| Average Scale Factor | 7.87 V/mm (200 mV/mil) typical |
| Operating Temperature Range | -52 degC to +177 degC (-62 degF to +350 degF) |
| Pressure Seal Rating | Tip sealed to probe case with Viton O-ring |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Tensile Strength (Maximum Rated) | 330 N (75 lbf) probe case to lead |
| Weight | 0.34 kg (340 g) |
| Dimensions | 220 mm x 220 mm x 35 mm (H x W x D) (Packaged/Coiled) |
Maintain a minimum cable bend radius of 25.4 mm (1.0 in) during routing to prevent cable damage. Torque probe case into mounting thread up to a maximum of 22.6 N-m (200 in-lbf). Use of the pre-installed connector protector shields the ClickLoc connection from oil, moisture, and debris. Verify that the combined length of the probe and extension cable matches the calibrated length of the Proximitor sensor (typically 5.0 or 9.0 meters total). Route probe cables away from high-voltage lines to minimize electromagnetic interference.
This device complies with CSA (Class I, Div 1, Groups A, B, C, D; Class II, Div 1, Groups E, F, G; Class III) and ATEX / IECEx (Ex ia IIC T1...T5 Ga / Ex ia IIIC T* Db) certifications for safe installation in hazardous and explosive atmospheres.
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
