Bently Nevada 330102-00-79-05-02-05 3300 XL 8 mm Proximity Probe

Description

The 330102-00-79-05-02-05 is an armored 3300 XL 8 mm proximity probe designed for non-contact eddy-current displacement measurement in critical rotating machinery. This specific configuration features a 3/8-24 UNF threaded body with a 0.0 in unthreaded length (Option 00) and a 7.9 in case length (Option 79). The probe is equipped with a 0.5 m total cable length (Option 05) and terminates in a miniature coaxial ClickLoc connector (Option 02). This unit includes agency approvals for CSA, ATEX, and IECEx (Option 05).

As part of the 3300 XL 8 mm Transducer System, this probe is engineered to withstand harsh industrial environments. The integrated stainless steel armor provides mechanical protection for the cable, while the probe design ensures accurate shaft vibration and axial position measurement when paired with a compatible 3300 XL Proximitor sensor and extension cable. The standard ClickLoc connector simplifies installation and helps prevent loose connections during operation.

Features

• 330102 series armored probe design for enhanced cable protection
• 3/8-24 UNF threaded body (0.0 in unthreaded length, 7.9 in case length)
• Miniature coaxial ClickLoc connector for reliable signal integrity
• Standard cable construction suitable for general industrial applications
• CSA, ATEX, IECEx hazardous area certifications (Option 05)
• System-compatible with 3300 XL 8 mm Proximitor sensors and extension cables

Applications

• Radial vibration and axial position monitoring on steam and gas turbines
• Compressor shaft displacement monitoring
• Rotating machinery protection in oil and gas, power generation, and petrochemical facilities
• Continuous vibration analysis in environments requiring hazardous area compliance

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is installed using an appropriate mounting bracket to prevent mechanical damage. Maintain the required probe gap as specified in the 3300 XL system manual. Grounding and shielding practices must be followed to avoid ground loops and signal interference. When installing in hazardous areas, verify that the agency certifications match the installation location requirements.