Bently Nevada 330103-00-05-15-01-00 3300 XL 8 mm Proximity Probe

Description

330103-00-05-15-01-00 is a 3300 XL 8 mm proximity probe configuration featuring a 3/8-24 UNF threaded connection, 0.5 in case length (Option 05), 1.5 m total length (Option 15), and standard connector (Option 01) with no agency approval required (Option 00). This probe is engineered for non-contact eddy-current displacement measurement within 3300 XL monitoring chains, providing precise shaft vibration and axial position data in critical rotating machinery applications.

This configuration utilizes a 3/8-24 UNF threaded body, which differs from unthreaded variants in mounting flexibility. When paired with the 330180 Proximitor sensor and 330130 extension cable, this probe maintains full system calibration and linearity across its measurement range. The system design ensures consistent performance in harsh environments where reliable monitoring of rotor position and vibration is critical for machinery health and protection.

Features

• Threaded mounting: 3/8-24 UNF thread for adjustable probe positioning.
• Case length: 0.5 in (Option 05).
• Total system length: 1.5 m (Option 15), compatible with 3300 XL 8 mm standard chain length calibrations.
• Connector type: Standard miniature ClickLoc connector (Option 01).
• Agency approval: Not required (Option 00).
• Compatibility: Designed for use with 3300 XL 8 mm Proximitor sensors and extension cables.

Applications

• Steam and gas turbine shaft vibration monitoring.
• Centrifugal compressor axial position measurement.
• Critical rotating machinery protection systems.
• Turbomachinery monitoring in oil, gas, and power generation facilities.

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is installed with the correct gap voltage, typically set at -10 V DC when centered within the linear range. Secure the probe using the included lock nuts to prevent vibration-induced loosening. Cables should be routed away from high-voltage AC lines to prevent signal interference. Use appropriate conduit or cable protection in high-abrasion environments. Do not exceed the minimum bend radius of the coaxial cable during installation.