Bently Nevada 330103-00-09-10-02-00 3300 XL 8 mm Proximity Probe

Description

The 330103-00-09-10-02-00 is an unarmored 3300 XL 8 mm proximity probe designed for non-contact eddy-current displacement measurement. This specific configuration features an M10 x 1 thread, 0 mm unthreaded length (Option 00), 90 mm total case length (Option 09), and 1.0 meter total system length (Option 10). It is terminated with a miniature coaxial ClickLoc connector and uses a standard cable (Option 02).

This probe is a primary component in 3300 XL 8 mm proximity transducer systems, typically used for monitoring radial vibration and axial position on rotating machinery such as turbines, compressors, and pumps. It is compatible with 3300 XL Proximitor sensors and 3300 XL extension cables. The system is designed to provide highly accurate gap measurements in industrial environments, with this specific variant requiring no hazardous area certifications (Option 00).

Features

• M10 x 1 thread specification (330103 model series)
• Unarmored probe construction
• 0 mm unthreaded length configuration
• 90 mm overall case length
• 1.0 meter total system length
• Miniature coaxial ClickLoc connector with standard cable
• Agency Approval: Not required (general purpose)

Applications

• Turbine and compressor shaft radial vibration monitoring
• Axial position (thrust) measurement
• Critical rotating machinery protection
• General purpose industrial vibration monitoring chains

Ordering Information

Technical Specifications

Installation Guidelines

Ensure the probe is gapped correctly according to the 3300 XL system manual to maintain linear range. Use care when handling the ClickLoc connector to prevent contamination or damage. Ensure the probe is mounted securely using the appropriate M10 x 1 threaded bracket. Verify that the probe cable is routed away from high-voltage lines and sources of electromagnetic interference.