Option 05 (50 mm unthreaded length) and Option 12 (120 mm overall case length) specify this unarmored, metric-threaded 3300 XL 8 mm proximity probe configuration — 330103-05-12-10-01-00. This non-contacting eddy-current sensor belongs to the Bently Nevada 3300 XL series and is engineered for shaft vibration, axial position, and speed measurements on rotating machinery. Because it has an unarmored standard FEP cable with a 1.0-meter total length (Option 10) and is equipped with a ClickLoc connector with an integrated connector protector (Option 01), this configuration is ideal for installations inside machinery housings where physical shielding is already present and environmental connector isolation is needed.
Unlike variants using the 05 agency approval option, this model represents the Option 00 configuration, meaning it does not carry hazardous area certifications like ATEX, IECEx, or CSA, making it a cost-effective choice for general-purpose or non-hazardous plant areas. Its M10 x 1 metric thread allows direct mounting into metric threaded holes without the need for thread adapters. The probe utilizes polyphenylene sulfide (PPS) for the tip encapsulation, providing robust chemical resistance and physical durability inside oil-rich machine casings.
Used primarily for vibration and displacement monitoring on industrial rotating machinery including:
| Option / Segment | Code on This SKU | Meaning / Configuration |
|---|---|---|
| Orderable Part Number | 330103-05-12-10-01-00 | 3300 XL 8 mm Probe, M10 x 1 thread, without armor |
| A - Unthreaded Length Option | 05 | 50 mm unthreaded length (increments of 10 mm) |
| B - Overall Case Length Option | 12 | 120 mm overall case length (increments of 10 mm) |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total length |
| D - Connector and Cable-Type Option | 01 | Miniature coaxial ClickLoc connector with connector protector, standard cable |
| E - Agency Approval Option | 00 | Agency approvals not required |
| Parameter | Value / Specification |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model / Part Number | 330103-05-12-10-01-00 |
| Transducer Type | Eddy-current proximity probe |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Thread Type | M10 x 1 metric thread |
| Armor Option | None (without armor) |
| Unthreaded Length | 50 mm |
| Overall Case Length | 120 mm |
| Total Length | 1.0 meter (3.3 feet) |
| Cable Type | 75 Ohm triaxial FEP insulated probe cable |
| Connector Type | Miniature male coaxial ClickLoc with connector protector |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Probe DC Resistance | 7.59 +/- 0.50 Ohms (center conductor to outer conductor) |
| Operating and Storage Temperature | -52 degC to +177 degC |
| Probe Relative Humidity | Less than 3% change in Average Scale Factor (ASF) up to 56 days in 93% humidity |
| Maximum Rated Tensile Strength | 330 N (75 lbf) probe case to probe lead; 270 N (60 lbf) probe lead to connector |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Dimensions | 120 mm x 10 mm x 10 mm (H x W x D) |
| Weight | 0.32 kg |
| Component | Interface Detail |
|---|---|
| Probe Lead Connector | Miniature gold-plated coaxial ClickLoc male connector |
| Connector Protector | Fluorosilicone material protecting the probe-to-extension cable interface |
Ensure correct mechanical installation of the metric proximity probe to secure accurate measurements:
This specific variant (330103-05-12-10-01-00) is configured with Option 00 (no agency approvals required). It is designed for use in non-hazardous, general-purpose industrial locations. For application requirements inside hazardous areas, select alternative variants ending in -05 (ATEX, IECEx, CSA approved) or suffix variants ending in -CN (NEPSI, CCC certified).
Global Express Shipping
Returns & Warranty
Manufacturer: Bently Nevada
Product No.: 330103-05-12-10-01-00
Country of origin:United States
Product Type: 3300 XL 8 mm Proximity Probe
Barcode: 8537101190
Payment: T/T, Western Union
Weight: 320g
Dimensions: 120 mm x 10 mm x 10 mm (H x W x D)
Shipping port: Xiamen
Warranty: 12 months
Option 05 (50 mm unthreaded length) and Option 12 (120 mm overall case length) specify this unarmored, metric-threaded 3300 XL 8 mm proximity probe configuration — 330103-05-12-10-01-00. This non-contacting eddy-current sensor belongs to the Bently Nevada 3300 XL series and is engineered for shaft vibration, axial position, and speed measurements on rotating machinery. Because it has an unarmored standard FEP cable with a 1.0-meter total length (Option 10) and is equipped with a ClickLoc connector with an integrated connector protector (Option 01), this configuration is ideal for installations inside machinery housings where physical shielding is already present and environmental connector isolation is needed.
Unlike variants using the 05 agency approval option, this model represents the Option 00 configuration, meaning it does not carry hazardous area certifications like ATEX, IECEx, or CSA, making it a cost-effective choice for general-purpose or non-hazardous plant areas. Its M10 x 1 metric thread allows direct mounting into metric threaded holes without the need for thread adapters. The probe utilizes polyphenylene sulfide (PPS) for the tip encapsulation, providing robust chemical resistance and physical durability inside oil-rich machine casings.
Used primarily for vibration and displacement monitoring on industrial rotating machinery including:
| Option / Segment | Code on This SKU | Meaning / Configuration |
|---|---|---|
| Orderable Part Number | 330103-05-12-10-01-00 | 3300 XL 8 mm Probe, M10 x 1 thread, without armor |
| A - Unthreaded Length Option | 05 | 50 mm unthreaded length (increments of 10 mm) |
| B - Overall Case Length Option | 12 | 120 mm overall case length (increments of 10 mm) |
| C - Total Length Option | 10 | 1.0 meter (3.3 feet) total length |
| D - Connector and Cable-Type Option | 01 | Miniature coaxial ClickLoc connector with connector protector, standard cable |
| E - Agency Approval Option | 00 | Agency approvals not required |
| Parameter | Value / Specification |
|---|---|
| Manufacturer | Bently Nevada (Baker Hughes) |
| Model / Part Number | 330103-05-12-10-01-00 |
| Transducer Type | Eddy-current proximity probe |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Thread Type | M10 x 1 metric thread |
| Armor Option | None (without armor) |
| Unthreaded Length | 50 mm |
| Overall Case Length | 120 mm |
| Total Length | 1.0 meter (3.3 feet) |
| Cable Type | 75 Ohm triaxial FEP insulated probe cable |
| Connector Type | Miniature male coaxial ClickLoc with connector protector |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel (SST) |
| Probe DC Resistance | 7.59 +/- 0.50 Ohms (center conductor to outer conductor) |
| Operating and Storage Temperature | -52 degC to +177 degC |
| Probe Relative Humidity | Less than 3% change in Average Scale Factor (ASF) up to 56 days in 93% humidity |
| Maximum Rated Tensile Strength | 330 N (75 lbf) probe case to probe lead; 270 N (60 lbf) probe lead to connector |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Dimensions | 120 mm x 10 mm x 10 mm (H x W x D) |
| Weight | 0.32 kg |
| Component | Interface Detail |
|---|---|
| Probe Lead Connector | Miniature gold-plated coaxial ClickLoc male connector |
| Connector Protector | Fluorosilicone material protecting the probe-to-extension cable interface |
Ensure correct mechanical installation of the metric proximity probe to secure accurate measurements:
This specific variant (330103-05-12-10-01-00) is configured with Option 00 (no agency approvals required). It is designed for use in non-hazardous, general-purpose industrial locations. For application requirements inside hazardous areas, select alternative variants ending in -05 (ATEX, IECEx, CSA approved) or suffix variants ending in -CN (NEPSI, CCC certified).
Global Express Shipping
Returns & Warranty
Orders are processed and delivered Monday-Friday (excluding public holidays).
For full eligibility, restocking fees, and international return details, please view our official Refund & Return Policy .
| Country of origin |
United States
|
Implement a 3-SPST switch XOR light circuit in LogixPro or RSLogix 500 using an internal relay bit. Includes truth tables, boolean equations, and verified.
Integrate Allen-Bradley CompactLogix, Caterpillar ATS, and generators into DeltaV DCS over Modbus RTU. Covers ProSoft MVI69-MCM, Miille DIN266 gateways.
ONS instruction fires but the OTE coil never latches in Studio 5000 because the one-shot is only true for one scan. Use OTL/OTU or seal-in logic instead.
Configure Allen-Bradley Kinetix 5500 servo drives on EtherNet/IP. Covers CIP Sync, IEEE 1588 V2 timing, Stratix selection, DLR topology, and HMI.
A moving-average filter is the sliding-window smoother most instrument engineers drop into DCS and PLC analog paths. Here is how the window works, how N and sample time set lag, and when a...
On Frame 5–9 gas turbines, GE Mark VI and Mark VIe run control as function-block application software. This article maps process, protection, and sequencing functions—and what Toolbox ST access...
